Linksys VLAN Setup and Advanced Configuration for the SRW208 Switches

Chapter 5 Advanced Configuration

Admin Status  Indicates whether PoE is enabled or disabled on the port.

Priority  Indicates the PoE priority setting of the port. The possible values are: Critical, High and Low. The default is Low.

Power Allocation (milliwatts)  Indicates the actual amount of power the device can supply.

Mode  Indicates whether the port is enabled to utilize PoE.

Power Consumption (milliwatts)  Indicates the amount of the power used by the device.

NOTE: The Modify PoE Page displays the currently configured PoE ports. This option is only seen on the SRW208P and SRW208MP.

VLAN Management > Create VLAN

The Create VLAN screen provides information and global parameters for configuring and working with VLANs.

VLAN Management > Create VLAN

Single VLAN

VLAN ID (2-4094) Indicates the ID number of the VLAN being configured. Up to 256 VLANs can be created. This field is used to add VLANs one at a time. To add the defined VLAN ID number, press the Add button.

VLAN Name  Displays the user-defined VLAN name.

VLAN Range

VLAN Range. Indicates a range of VLANs being configured. To add the defined range of VLAN ID numbers, press the Add Range button.

VLAN Table

The VLAN Table displays a list of all configured VLANs. The VLAN ID, VLAN Name, and status of the VLAN are displayed here. To remove a VLAN, click the Remove button.

VLAN Management > Port Settings

VLAN Management > Port Settings

The VLAN Port Settings screen provides parameters for managing ports that are part of a VLAN. The port default VLAN ID (PVID) is configured on the VLAN Port Settings screen. All untagged packets arriving to the device are tagged by the ports PVID.

Port  The port number included in the VLAN:

•• Mode  Indicates the port mode. Possible values are:

•• General  The port belongs to VLANs, and each VLAN is user-defined as tagged or untagged (full 802.1Q mode).

•• Access  The port belongs to a single untagged VLAN. When a port is in Access mode, the packet types which are accepted on the port (packet type) cannot be designated. It is also not possible to enable/disable ingress filtering on an access port.

•• Trunk  The port belongs to VLANs in which all ports are tagged (except for an optional single native VLAN).

Acceptable Frame Type  Packet type accepted on the port. Possible values are:

•• Admit Tag Only  Indicates that only tagged packets are accepted on the port.

•• Admit All  Indicates that both tagged and untagged packets are accepted on the port.

8-Port 10/100 Ethernet Switch with Webview 24