Chapter 5

Advanced Configuration

The MAC Based ACL screen allows a MAC based ACL to be defined. ACEs can be added only if the ACL is not bound to an interface.

ACL Name  Displays the user-defined MAC based ACLs.

New ACL Name  Specifies a new user-defined MAC based ACL name.

Delete ACL  Deletes the selected ACL.

Action  Indicates the ACL forwarding action. Possible field values are:

•• Permit  Forwards packets which meet the ACL criteria.

•• Deny  Drops packets which meet the ACL criteria.

•• Shutdown  Drops packet that meet the ACL criteria, and disables the port to which the packet was addressed.

Source MAC Address  Matches the source MAC address to which packets are addressed to the ACE.

Wildcard Mask  Defines the source IP address wildcard mask. Wildcard masks specify which bits are used and which bits are ignored. A wild card mask of 255.255.255.255 indicates that no bit is important. A wildcard of 0.0.0.0 indicates that all the bits are important. For example, if the source IP address 149.36.184.198 and the wildcard mask is 255.36.184.00, the first eight bits of the IP address are ignored, while the last eight bits are used.

Dest. MAC Address  Matches the destination MAC address to which packets are addressed to the ACE.

Wildcard Mask  Defines the destination IP address wildcard mask.

VLAN ID  Matches the packet’s VLAN ID to the ACE. The possible field values are 2 to 4094.

Ether Type  Specifies the packet’s Ethernet type.

The Add to List button adds the configured MAC Based ACLs to the MAC Based ACL Table at the bottom of the screen.

Security > ACL Binding

Security > ACL Binding

When an ACL is bound to an interface, all the ACE rules that have been defined are applied to the selected interface. Whenever an ACL is assigned on a port or LAG, flows from that ingress interface that do not match the ACL are matched to the default rule, which is Drop unmatched packets.

Interface  Indicates the interface to which the ACL is bound.

ACL Name  Indicates the ACL which is bound to the interface.

The Add to List button adds the ACL Binding configuration to the ACL Binding Table at the bottom of the screen.

Security > RADIUS

Security > RADIUS

8-Port 10/100 Ethernet Switch with Webview

33

Page 39
Image 39
Linksys SRW208P, SRW208MP, SRW208L, SRW208G manual Security ACL Binding, Security Radius