Chapter 5 Advanced Configuration
23
8-Port 10/100 Ethernet Switch with Webview
Current Status Indicates if the LAG is currently
operating.
Reactivate Suspended LAG Reac tivates a LAG if the
LAG has been disabled as a result of a port lock or ACL
operation.
Admin Auto Negotiation Enables or disables Auto
Negotiation on the LAG. Auto-negotiation is a protocol
between two link partners that enables a LAG to advertise
its transmission rate, duplex mode and flow control (the
flow control default is disabled) abilities to its partner.
Current Auto Negotiation The current Auto Negotiation
setting.
Admin Speed The configured speed at which the LAG is
operating.
Current LAG Speed The current speed at which the LAG
is operating.
Admin Flow Control Enables or disables flow control or
enables the auto negotiation of flow control on the LAG.
Current Flow Control The user-designated Flow Control
setting.
PVE Displays the PVE group to which the LAG is
configured.

Select Ports

Ports Displays the ports that are members of the selected
LAG.
Port Management > LACP
Aggregate ports can be linked into link-aggregation por t
groups. Each group is comprised of por ts with the same
speed, set to full-duplex operation.
Aggregated Links can be manually setup or automatically
established by enabling Link Aggregation Control
Protocol (LACP) on the relevant links. Aggregate ports can
be linked into link-aggregation port-groups. Each group is
comprised of ports with the same speed. The LACP screen
contains fields for configuring LACP LAGs.
Port Management > LACP
LACP System Priority (1-65535) I ndicates the global
LACP priority value. The possible range is 1- 65535. The
default value is 1.
Port Defines the por t number to which timeout and
priority values are assigned.
LACP Port Priority Defines the LACP priorit y value for
the port. The field range is 1-65535.
LACP Timeout Administrative LACP timeout. A short or
Long timeout value can be selected. Long is the default.
Admin Key A channel will only be formed between ports
having the same admin key. This only applies to ports
located on the same switch.
Port Management > PoE Power Settings
Port Management > PoE Power Settings
Port Displays the selected port’s number.