VTech CS6114-2 user manual Telephone operation

Page 14

Telephone operation

Make a call

•Press /FLASH and then use the dialing keys (0-9) to dial the telephone number.

Predial a call

•Enter the telephone number using the dialing keys (0-9), then press /FLASH to dial.

CANCEL

• The screen shows the elapsed time as you talk (in hours, minutes and seconds).

•When predialing (preview numbers before dialing), press MUTE/DELETE or OFF/CANCEL to backspace and delete; press and hold REDIAL/PAUSE to insert a dialing pause (a P appears).

•If the handset is moved out of range while on a call, it will beep three times.

Answer a call

• Press /FLASH or any of the dialing keys (0-9, TONE or #).

End a call

• Press OFF/CANCEL or put the handset to the telephone base or charger.

Volume

•During a call, press CID/VOL- or /VOL+ to adjust the listening volume.

Mute

The mute function allows you to hear the other party but the other party cannot hear you.

1.During a call, press MUTE/DELETE on the handset. The handset screen displays Muted until the mute function is turned off.

2.Press MUTE/DELETE again to resume the conversation. The handset screen temporarily displays Microphone on.

Muted

10:15PM 12/25

Call waiting

When you subscribe to call waiting service from your telephone service provider, you hear an alert tone if there is an incoming call while you are on another call.

• Press /FLASH to put the current call on hold and take the new call.

• Press /FLASH at any time to switch back and

forth between calls.

11

CANCEL

Image 14

Contents Online user’s manual Congratulations Table of contents Parts checklist Getting startedTelephone base and charger installation Wall mountingBattery installation ChargeBattery charging Telephone base layoutHandset layout CID/VOLMENU/SELECT Ringer volume Telephone settingsUsing the menu Ringer toneLCD language To change the settingTo manually turn off these indicators Clear voicemailKey tone Set date and timeWebsite Dial modeHome area code Telephone operation Find handset Temporary ringer silencingTemporary tone dialing Multiple handset use for CS6114-2 onlyReview the redial list Chain dialingRedial list Directory Dial a redial entryDelete a redial entry Add a directory entry To search the directory Character chartReview the directory Edit a directory entry Alphabetical searchDial a directory entry To start an alphabetical searchInformation about caller ID with call waiting Delete a directory entryAbout caller ID Missed call indicator Call logView dialing options Memory matchReview the call log Dial a call log number Save a call log entry to the directoryDelete the call log entries Call log display screen messagesAppendix Display screen messagesTelephone base light Handset and telephone base indicatorsHandset light Handset screen iconsBattery Battery needs charging whenThere is no dial tone TroubleshootingMy telephone does not work at all Cannot dial outCharge light is off Low battery shows on the handset screenTelephone does not ring when there is an incoming call Hear noise on the cordless handset and the keys do not work Hear other calls when using the telephoneMy handset beeps and is not performing normally My caller ID features are not working properly Out of range or no pwr at base shows on the handset screenCannot retrieve voicemail messages Common cure for electronic equipmentImportant safety instructions Operating range Precautions for users of implanted cardiac pacemakersMaintenance About cordless telephones Rbrc sealWarranty What does this limited warranty cover?FCC Part FCC Part 68 and Acta Technical specifications Index Index All rights reserved. Version 9 11/11