VTech CS6114-2 user manual Telephone base and charger installation, Wall mounting

Page 5

Getting started

Telephone base and charger installation

Install the telephone base and charger as shown below.

Make sure that the electrical outlet is not controlled by a wall switch.

If you subscribe to digital subscriber line (DSL) high-speed Internet service through your telephone line, you must install a DSL filter between the telephone line cord and telephone wall jack. The filter prevents noise and caller ID problems caused by DSL interference. Contact your DSL service provider for more information about DSL filters.

Telephone wall jack

A DSL filter (not included) is required if you have DSL high-speed Internet service

Telephone line cord

Electrical outlet

(not controlled by a wall switch)

	Telephone base	Charger
	power adapter
		adapter

Telephone base

Charger

• Use only the power adapters and batteries supplied with this product. To order a replacement, visit our website at www.vtechphones.com or call 1 (800) 595-9511. In Canada, go to www.vtechcanada.com or call 1 (800) 267-7377.

•The power adapters are intended to be correctly oriented in a vertical or floor mount position. The prongs are not designed to hold the plug in place if it is plugged into a ceiling, under-the-table or cabinet outlet.

Wall mounting

Your telephone comes ready for tabletop use. If you prefer to mount your telephone on the wall (optional), it is designed to mount on a standard telephone wall plate.

You can mount the telephone base on the wall by positioning the

top hole at the back of the telephone
base against the top mounting
stud [A]. Then slide the telephone	[A]
base down on the mounting
studs [A] and [B] until it locks
into place.
Mounting
studs
	[B]
	Telephone base

Image 5

Contents Online user’s manual Congratulations Table of contents Getting started Parts checklistWall mounting Telephone base and charger installationCharge Battery installationTelephone base layout Battery chargingCID/VOL Handset layoutMENU/SELECT Using the menu Telephone settingsRinger volume Ringer toneTo manually turn off these indicators To change the settingLCD language Clear voicemailSet date and time Key toneWebsite Dial modeHome area code Telephone operation Temporary tone dialing Temporary ringer silencingFind handset Multiple handset use for CS6114-2 onlyReview the redial list Chain dialingRedial list Directory Dial a redial entryDelete a redial entry Add a directory entry To search the directory Character chartReview the directory Dial a directory entry Alphabetical searchEdit a directory entry To start an alphabetical searchInformation about caller ID with call waiting Delete a directory entryAbout caller ID Call log Missed call indicatorView dialing options Memory matchReview the call log Save a call log entry to the directory Dial a call log numberCall log display screen messages Delete the call log entriesDisplay screen messages AppendixHandset light Handset and telephone base indicatorsTelephone base light Handset screen iconsBattery needs charging when BatteryMy telephone does not work at all TroubleshootingThere is no dial tone Cannot dial outCharge light is off Low battery shows on the handset screenTelephone does not ring when there is an incoming call Hear noise on the cordless handset and the keys do not work Hear other calls when using the telephoneMy handset beeps and is not performing normally Out of range or no pwr at base shows on the handset screen My caller ID features are not working properlyCommon cure for electronic equipment Cannot retrieve voicemail messagesImportant safety instructions Operating range Precautions for users of implanted cardiac pacemakersMaintenance Rbrc seal About cordless telephonesWhat does this limited warranty cover? WarrantyFCC Part FCC Part 68 and Acta Technical specifications Index Index All rights reserved. Version 9 11/11