VTech Battery Charging and Maintenance for Telephones

Page 7

Getting started

Battery charging

Once you have installed the battery, the screen indicates the battery status (see the table below). If necessary, place the handset in the telephone base or charger to charge the battery. For best performance, keep the handset in the telephone base or charger when not in use. The battery is fully charged after 16 hours of continuous charging. See the table on page 25 for battery operating times.

If the screen is blank, you need to charge the handset without interruption for at least 30 minutes to give the handset enough charge to use the telephone for a short time. When the battery is low, the handset displays Low battery along with a flashing icon. If you are on a call in low battery mode, the handset beeps every 50 seconds.

The following table summarizes the battery charge indicators and actions to take.

Battery indicators

Battery status

Action

The screen is blank,

Battery has very little or

Charge without interruption

or displays Place in

no charge. The handset

(at least 30 minutes).

charger and

 

flashes.

cannot be used.

 

 

 

 

 

 

 

 

The screen displays

Battery has enough

Charge without interruption

Low battery and

charge to be used for a

(about 30 minutes).

 

 

flashes.

short time.

 

 

 

 

 

 

 

 

The screen displays

Battery is charged.

To keep the battery charged,

HANDSET X and

 

place it in the telephone

--:-- --/--.

 

 

 

base or charger when not

 

 

 

 

 

 

in use.

If you place the handset in the telephone base or charger without plugging in the battery, the screen displays No battery.

Telephone base layout

IN USE light

On when the handset is in use.

Flashes quickly when there is an incoming call.

Flashes when another telephone sharing the same line is in use.

/FIND HANDSET

Press once and then release to page all system handsets (page 12).

Image 7
Contents Online user’s manual Congratulations Table of contents Getting started Parts checklistWall mounting Telephone base and charger installationCharge Battery installationTelephone base layout Battery chargingCID/VOL Handset layoutMENU/SELECT Ringer tone Telephone settingsUsing the menu Ringer volumeClear voicemail To change the settingTo manually turn off these indicators LCD languageSet date and time Key toneHome area code Dial modeWebsite Telephone operation Multiple handset use for CS6114-2 only Temporary ringer silencingTemporary tone dialing Find handsetRedial list Chain dialingReview the redial list Delete a redial entry Dial a redial entryDirectory Add a directory entry Review the directory Character chartTo search the directory To start an alphabetical search Alphabetical searchDial a directory entry Edit a directory entryAbout caller ID Delete a directory entryInformation about caller ID with call waiting Call log Missed call indicatorReview the call log Memory matchView dialing options Save a call log entry to the directory Dial a call log numberCall log display screen messages Delete the call log entriesDisplay screen messages AppendixHandset screen icons Handset and telephone base indicatorsHandset light Telephone base lightBattery needs charging when BatteryCannot dial out TroubleshootingMy telephone does not work at all There is no dial toneTelephone does not ring when there is an incoming call Low battery shows on the handset screenCharge light is off My handset beeps and is not performing normally Hear other calls when using the telephoneHear noise on the cordless handset and the keys do not work Out of range or no pwr at base shows on the handset screen My caller ID features are not working properlyCommon cure for electronic equipment Cannot retrieve voicemail messagesImportant safety instructions Maintenance Precautions for users of implanted cardiac pacemakersOperating range Rbrc seal About cordless telephonesWhat does this limited warranty cover? WarrantyFCC Part FCC Part 68 and Acta Technical specifications Index Index All rights reserved. Version 9 11/11