VTech NEAX 2400 IPX manual Dial Intercom, To bridge into a dial intercom call

Dial Intercom

To initiate

Lift handset or press the Speaker key. Press DICM key.

Dial desired intercom station number. Receive ringback tone.

To answer

DICM LED flashes, indicating an incoming intercom call. Press DICM.

Lift handset or press Speaker. LCD shows solid green. If called station is engaged in a non-intercom call,

the station may press DICM after placing the original call on hold (with the Hold key.)

	Called party
ICM	2
4:26 PM	TUE 13 APR 2004

	Calling party
ICM	2
4:26 PM	TUE 13 APR 2004

To bridge into a dial intercom call

Note: Bridging is an optional feature.		Overriding party
Press the DICM key, lift handset or press Speaker.
	OVERRIDE		3
	4:26 PM	TUE 13	APR 2004
A three-party conference is established.
	CONF
	4:26 PM	TUE 13	APR 2004

Note: Dial intercom provides a Dial Intercom group where each member of the group may be called by a 1- or 2-digit number without using their prime lines.

– 41 –