VTech NEAX 2400 IPX manual To Place a Call on Hold, To Place a Call on Exclusive Hold, To retrieve

To Place a Call on Hold

Press Hold. Held line flashes.

Note: If held line appears on other Dterm stations, the associated LED flashes red slowly.

To retrieve

Lift handset or press Speaker.

Press held line. Use handset to converse.

Note: Any station with this line appearance can retrieve the call.

	Held station
	number
HOLD	2001
4:26 PM	TUE 13 APR 2004

If unanswered

After preprogrammed time, Automatic Recall is initiated.

Visual and audible signal (rapid flash and ring burst) is sent to station that placed call on hold.

Note 1: A transfer or conference call may be placed on hold depending on software level of the NEAX2400 IPX.

Note 2: Hold shows as a flashing green LED on your phone. The same line on other phones shows as a flashing red LED.

Recall shows as a flashing green LED on your phone and flashing red LED on other phones with the same line.

To Place a Call on Exclusive Hold

Press Hold twice. Line appearance indicates interrupted wink.

Note: If held line appears on other Dterm stations,

LED remains steadily lit red.

To retrieve

Lift handset or press Speaker.

Press held line. Use handset to converse.

Note: Only the Dterm that set Exclusive Hold option can retrieve the call.

	Held station
	number
E_HOLD	2001
4:26 PM	TUE 13 APR 2004

– 42 –