O P E R A T I N G I N S T R U C T . I O N S
set can join in.
nWhen someone at the handset has al- ready joined the conversation, pressing PRV on the Speakerphone will turn off the handset.
mode.
lntercom from Base Unit to Handset
Press INT.COM on the Base Unit.
If the Handset is in the OFF mode, it will
ring a maximum of 4 times. The Handset
user can respond to the INTERCOM ring by
pressing INT.COM. The Handset user can
also choose to ignore the INTERCOM ring, in
which case, the ringing will stop after 4 rings.
Otherwise, the Handset user can press OFF,
which will terminate the ringing.
Press INT.COM to terminate INTERCOM
mode.
IF YOUR PHONE RINGS DURING AN INTERCOM CONVERSATION
If you receive a call while using the Inter-
USING"INGTHE INTERCOM DURING A PHONE^
CALL>,
Press HOLD to put the call on hold, then
use the lntercom normally.
To end the lntercom conversation, press
calling cards, or other special services.
First, dial the call normally. Then activate the Temporary Tone feature by pressing
key. You can then press the numbers
To end the call, press OFF (on the Hand- set), or place the Handset back in the Base Unit cradle. From Base Unit ~ r e s SPKRs to end a call. The phone will automatically go
USING THE INTERCOM / HANDSET LOCA- TOR
You can use your 917ADXcordless tele- phone as a
w~ h lntercom can be activated by either the Handset or the Base Unit.
lntercom from Handset to Base Unit Press INT.COM. on the Handset
The Base Unit will emit two beeps, and will
then automatically enter lntercom mode.
The party at the Base Unit does not need
to press a key to activate this feature when it
is initiated from the Handset.
Press OFF to terminate INTERCOM
NOTE: If the Handset is ON when INT.COM is pressed on the Base Unit, the Handset will emit only one ringer tone, and then return to the original call.
Handset Locator
Occasionally you may misplace your 917 ADX Handset. Use the lntercom feature on the Base Unit to help locate the missing Handset. When the INT.COM key is pressed, the Handset will ring four times.
OFF (on the Handset) or INT.COM (on the
Base Unit).
To return to the call, press PHONE (on the
Handset) or SPKR (on the Base Unit).
back to rotary | I |
8 , | |
| I |
The Temporary Tone feature is for use with |
|
PULSE dialing service only. |
|
PROGRAMMING THE RINGER TYPE
The 917ADXcordless phone has four dif-
-ferent ringing tones available for the Handset.
TEMPORARY TONE FEATURE . ,..
To program the Handset ringer tone:
If you have rotary
service, (TONEIPULSE switch is set to | Handset must be OFF |
|
|
|
|
|
|
|
|
| |
PULSE), Temporary Tone allows you to enter | Press PRGIPRV key on Handset |
|
|
| |
special codes and tones to access answering | 1Press # or * key on the ~ | ~ | ~ | d | ~ |
machines, electronic banking services, |
|
|
|
|
|