L- | U N I T F E A T U R E S |
|
BASE UNIT
B A S E U N I T
INTERCOM (INT.COM) LED
Flashes rapidly when the INT.COM key is pressed.
NOTE: The Handset must be away from the Base Unit to use the INTERCOM feature.
Blinks twice, accompanied by two beeps, when the Handset initiates the INTERCOM call to the Base Unit.
Glows steadily while the Handset and Base Unit are in INTERCOM mode.
SPEAKER (SPKR) LED
Glows when Base Unit is in SPEAKER- PHONE mode.
RINGER SWITCH
Transfer the call to the Handset
Return to the call by pressing SPKR.
HNOTE: If you have placed a call on HOLD and want to hang up:
Press SPKR to return to the call, then press SPKR again.
FLASH KEY
This key is used in conjunction with services such as CALL WAITING.
MUTE KEY
Press this key to mute the Handset microphone during a conversation. You will still be able to hear the other party, but they cannot hear you.
Press MUTE again to resume
I..
iI .
8
I
POWER IPWR) LED
Glows steadily when the AC adaptor is supplying power to the Base Unit.
IN USE LED
Glows steadily when the Handset is on a call.
Flashes in cadence with an incoming ring.
After initialization, the CHR LED will glow steadily to indicate that the Handset battery is being charged.
If the Handset is placed in the Base Unit without a battery, the CHR LED will flash rapidly.
HOLD LED
During a phone call, whether using Base or Handset,this LED will flash if the call is placed on HOLD.
Located on the right edge of the Base Unit (antenna side)
3 selections: HIGH, LOW, OFF
TONUPULSE SWITCH
Located next to RINGER switch
Select mode compatible with your local telephone service (for most areas, TONE is the preferred dialing mode).
conversation.
MEMORY (MEM) KEY
HPress this key to enter MEMORY DIALING mode.
The sequence for dialing a phone number stored in memory is: Press SPKR,MEM, Memory Location
PRIVACY (PRV) KEY
CHAR.GE (CHR) LED . | MUTE LED |
Blinks twice after placing the Handset in | During a SPEAKERPHONE call, this |
the Base Unit to indicate that initializa- | LED will glow if the MUTE key is |
tion (assigning a new security code) has | pressed. |
occurred. |
|
HOLD KEY
HPress this key to temporarily suspend conversation without terminating the call. With a call on HOLD, you can:
HIntercom the Handset
During a call, press PRV to prevent the Handset from joining the conversation.