Channel Scanning
Advanced Two-Way
By using SCAN, you can monitor channels and codes for transmissions and lock in on the one that interests you.You don’t have to set a new channel or code, the radio just resets itself temporarily to that channel and code and you can start talking. However, if no transmissions take place for five seconds, scanning resumes.
After you turn on SCAN, your radio scans channels and codes until it finds an active one and locks on to it. If you do not begin talking or no one else transmits within a short time, it will resume scanning.
If you want to scan channel frequencies without interference eliminator codes, change your code to 0.
Turning on Channel Scanning
To set channel scanning, select the TWO WAY mode and the SET SCAN menu. Your channel/code screen displays hand scrolls through channels when scanning is turned on.
28