GETTING STARTED
For the following explanations, refer to “Parts of the Radio” on page 10.
TURNING RADIO ON/OFF
To turn ON the radio, rotate the On/Off/Volume Knob clockwise. The radio will chirp and the LED Indicator will briefly blink red.
To turn the radio OFF, rotate the On/Off/Volume Knob counterclockwise until you hear a ‘click’ and the radio LED Indicator turns OFF.
ADJUSTING VOLUME
Turn the On/Off/Volume Knob clockwise to increase the volume, or counterclockwise to decrease the volume.
Note: Do not hold the radio too close to the ear when the volume is high or when adjusting the volume.
SELECTING A CHANNEL | GETTING | |
To select a channel, press SB2 side button until | ||
you reach the desired channel.Voice | ||
| ||
announcement will indicate the channel selected. |
| |
2 channels are active with factory default setting. | STARTED | |
Refer to "Advanced Radio Configuration" on | ||
| ||
Page 34 to active more channels. The radio can |
| |
operate up to 4 channels. |
| |
Each channel has its own Frequency, |
| |
| ||
Interference Eliminator Code and Scan Settings. |
| |
TALKING AND MONITORING |
| |
It is important to monitor for traffic before |
| |
transmitting to avoid ‘talking over’ someone |
| |
who is already transmitting. |
| |
To monitor, long press and hold the SB1(*) |
| |
button to access channel traffic. If no activity is |
| |
present, you will hear ‘static’. To release, press |
| |
SB1 again. Once channel traffic has cleared, |
| |
proceed with your call by pressing the PTT |
| |
button. When transmitting, the LED Indicator will |
| |
be On solid red during transmission. |
|
27 English