Motorola RMU2040 manual Example of Programming Auto-Scan, Example of Programming Active Channels

Example of Programming Auto-Scan

Auto-Scan is the third Programming Mode and can be set to either ON or OFF on a particular channel.

To set Auto-Scan to ON:

•Enter into advanced Configuration Mode and select the desired channel.

•Short press the PTT button three times to enter Auto-Scan Programming Selection Mode. The radio will announce "Auto-Scan" and current setting (Enabled or Disabled).

•Short press the SB1 or SB2 buttons to toggle Enabled/Disabled for the Auto-Scan feature on the selected channel.

•Long press the PTT button. LED Indicator will show a green heartbeat to indicate “Idle” state.

•Long press the PTT button to exit Programming Mode or turn radio OFF.

Example of Programming Active Channels

Active Channels is the last Programming Mode and It allows you to modify the number of active channels the radio will be programmed to support.

To set Active Channels:

•Enter Programming Mode and select the desired channel

•Short press the PTT button Four times to enter Active Channels Programming Selection Mode.

•The radio will announce "Active Channels" and current value.

•Short press the SB1 or SB2 buttons until you hear the number of channels desired.

•Long press the PTT button. LED Indicator will show a green heartbeat to indicate “Idle” state.

•Long press the PTT button to exit Programming Mode or turn radio OFF.

PROGRAMMING FEATURES

43English