Motorola RMU2040 manual Time-Out Timer, Scramble, Power Select, Call Tones, Reverse Burst

Bandwidth Select (Only Canada models)

All US models are compliants with the narrowbandwith FCC regulation.

Default setting for Bandwidth Select depends on the specific frequency and channel. Some frequencies have selectable channel spacing, which must match with other radios for optimum audio quality.

For details, refer to Frequency and Code Charts section.

Time-Out Timer

When pressing the PTT button, transmissions will be terminated after a preset time of continuous transmitting. The default setting is 60 sec and can be changed using the CPS.

Scramble

The Scramble feature makes transmissions sound garbled to anyone listening without the same code. Scramble default value is OFF. The Scramble feature must be programmed to SB1 or SB2.

Power Select
Power Select allows you to select between
high and low transmission power per channel.
The power levels for RM Series toggle
between 2W and 1W.
Call Tones
Call Tones feature allows you to transmit an
audible tone to other radios on the same	PROGRAMMING
channel and alerting them that you are about
to talk or alerting them	FEATURES
without speaking. The call tones feature must
be programmed to SB1 or SB2 and 1 of 3 pre-
recorded tones selected
Reverse Burst
Reverse Burst eliminates unwanted noise
(squelch tail) during loss of carrier detection.
You can select values of either 180 or 240 to
be compatible with other radios. Default is
180.

Notes: Some of the features available with the CPS software may vary depending on the radio model.

47 English