Grandstream Networks GXP11O5 manual Completing Calls, Making Calls using IP Addresses

During the call, users can press the FLASH key to hold the current call and make/answer another call. If they are 2 calls established, users can switch the two lines by pressing the FLASH key.

Completing Calls

The GXP1100/1105 allows you to make phone calls by picking up the handset. There are four ways to complete calls.

1.DIAL: To make a phone call.

Take handset off hook

The line will have a dial tone

Enter the phone number

Press “#” or SEND key to send

2.REDIAL: To redial the last dialed phone number.

Take handset off-hook

Press the SEND key

3.VIA SPEED DIAL: On the GXP1100/1105, the Multiple Purpose Key (programmable hard key) has to be configured as Speed Dial and with the correct name and user ID under Web GUI->Basic Settings configuration.

Take handset off hook

Press the configured Speed Dial key

4.VIA CALL RETURN: To dial the last answered call. On the GXP1100/1105, the Multiple Purpose Key (programmable hard key) has to be configured as Call Return under Web GUI->Basic Settings configuration. No user name and user ID has to be set on the Multiple Purpose Key for Call Return.

Take handset off hook

Press the configured Call Return key

NOTE:

1.Dial tone occurs after the handset is off-hook. After dialing the number, the phone waits 4 seconds (by default; No key Entry Timeout) before sending and initiating the call. Press “SEND” or “#” key to override the

4second delay.

2.If there are digits pressed, the SEND key will work as SEND instead of REDIAL.

3.By default, “#” can be used as SEND to dial the number out. Users could disable it by setting “User # as Dial Key” to “No” from web GUI->Accounts.

Making Calls using IP Addresses

Direct IP Call allows two phones to talk to each other in an ad-hoc fashion without a SIP proxy. VoIP calls can be made between two phones if:

Both phones have public IP addresses, or

Both phones are on a same LAN/VPN using private or public IP addresses, or

Both phones can be connected through a router using public or private IP addresses (with necessary port forwarding or DMZ)

To make a direct IP call, please follow these steps:

Take handset off

After hearing the dial tone, press “***” to enter the IVR menu

Grandstream Networks, Inc.	GXP1100/1105 User Manual	Page 9 of 34
	Firmware version: 1.0.1.110	Last Updated: 01/2012