Syslog Level
Send SIP Log
NTP server
Allow DHCP Option 42 to override NTP server
SSL Certificate
SSL Private Key
SSL Private Key
Password
Distinctive Ring Tone
System Ring Tone
Select the syslog level for GXP110x to report. Default is NONE.
The level is one of DEBUG, INFO, WARNING or ERROR. Syslog messages are sent based on the following events:
product model/version on boot up (INFO level)
NAT related info (INFO level)
sent or received SIP message (DEBUG level)
SIP message summary (INFO level)
inbound and outbound calls (INFO level)
registration status change (INFO level)
negotiated codec (INFO level)
Ethernet link up (INFO level)
SLIC chip exception (WARNING and ERROR levels)
memory exception (ERROR level)
The Syslog uses USER facility. In addition to standard Syslog payload, it contains the following components: GXP_1100: [device MAC address][firmware version] error message.
When setting the “Yes”, phone will send out SIP Log to syslog server. Default setting is “No”.
This parameter defines the URI or IP address of the NTP (Network Time Protocol) serve. It is used to display the current date/time.
Default is “Yes”. This allows device gets provisioned for DHCP Option 42 from the server automatically.
The user specified SSL certificate used for SIP over TLS.
The user specified SSL private key used for SIP over TLS.
User specified password to protect the private key above.
Select a Distinctive Ring Tone 1 through 3 for the caller ID. The Caller ID can be configured as a particular caller ID or
When a particular call ID is configured in the Caller ID, the selected ring tone will be used when the incoming call is from the Caller ID. System Ring Tone will be used for all other calls.
If server supports
System ring tone. Default is North American standard. Users could adjust system ring tone frequencies and cadences based on local telecom standard.
Grandstream Networks, Inc. | GXP1100/1105 User Manual | Page 22 of 34 |
| Firmware version: 1.0.1.110 | Last Updated: 01/2012 |