Cortelco C62 user manual Web Configuration, Factory Reset, Introduction of configuration

name must be entered.

7.6Factory Reset

Choose Yes to return the phone to factory default settings.

8 Web Configuration

8.1Introduction of configuration

8.1.1Configuration Methods

There are three methods which can be used to configure this phone:

Phone keypad – As discussed in previous sections

Web browser - Recommended way

Telnet with CLI command

8.1.2Password Configuration

There are two levels of access: root level and general level. A user with root level access can browse and set all configuration parameters, while a user with general level can set all configuration parameters except server parameters for SIP or IAX2.

∙Default user with general level:

Username: guest

Password: guest

∙Default user with root level:

Username: admin

Password: admin

The default password for the phone screen menu is 123.

8.2Setting via web browser

Enter the phone’s IP address into the address bar of the web browser. This assumes that the pc and the phone are on the same subnet. Note: Internet Explorer, Firefox, Chrome, or Safari are supported browsers.

If the IP address is not known, it can be displayed on the phone’s LCD by pressing the Menu->Status.

After entering the IP address, the following screen is displayed.

28