Cortelco C62 user manual Service Port, Field Name Explanation

Page 39

8.3.2.4Service Port

Set the port values for Telnet/HTTP/RTP on this page.

Field Name		Explanation

Web Server Type	Specify Web Server Type – HTTP or HTTPS

HTTP Port	Port for web browser access. Default value is 80. To enhance
	security, change this from the default. Setting this port to 0 will
	disable HTTP access.
	Example: The IP address is 192.168.1.70 and the port value is 8090,
	the accessing address is http://192.168.1.70:8090.

HTTPS Port	Port for HTTPS access.	Before using https, an https authentication
	certification must be downloaded into the phone.
	Default value is 443. To enhance security, change this from the
	default.

Telnet Port	Port for Telnet access.	The default is 23.

RTP Port Range Start	Set the beginning value for RTP Ports. Ports are dynamically
	allocated.

RTP Port Quantity	Set the maximum quantity of RTP Ports. The default is 200.

Notes:

1.Any changes made on this page require a reboot to become active.

2.It is suggested that changes to HTTP Port and Telnet ports be values greater than 1024. Values less than 1024 are reserved.

3.If the HTTP port is set to 0, HTTP service will be disabled.

39

Image 39

Contents Cortelco Safety Notices Table of Contents Other Functions 1.1 Appendix Keypad Box ContentsIntroducing C62 VoIP Phone Thank youPage LAN Input/Output PortsIcon Introduction WANProgrammable key LEDs for line LED IntroductionProgrammable key LEDs for BLF Programmable key LEDs for PresencePower Indication LED Power Light Disabled Initial Connection and SettingConnecting the phone Power Indication LED Power Light EnabledPPPoE Mode Network SettingsStatic IP Mode Dhcp Mode Do Not Disturb DND Basic FunctionsMaking a call Answering a callMute Call HoldCall Waiting Call Waiting ToneCall transfer 10 3-way conference callMultiple-way call Redial / Unredial Advanced FunctionsCall pickup Join callHotline/Warmline Click to dialCall back Auto answerLine Programmable Key ConfigurationPing Memory KeyNone Other FunctionsDtmf 5 URLDial Plan Auto HanddownBan Anonymous Call Ban OutgoingCall completion Power LightPassword Dial Auto RedialKeyboard Basic SettingScreen Settings Pre DialTime & Date Ring SettingsVoice Volume Ring VolumeGeneral Advanced SettingsGreeting Words LanguageNetwork MaintenanceAdvanced Settings Service CodeSetting via web browser Web ConfigurationFactory Reset Introduction of configurationBasic Status Configuration via WEBField Name Explanation WizardStatic IP Quick SIP Settings Language Call LogWAN Settings Network WAN ConfigIP Address or name of DSL Server LAN Config Qos & Vlan ConfigNAT Page SIP Dscp Field Name ExplanationService Port Dhcp Service TIME&DATE Voip SIP Configuration Daylight Saving Time SettingsManual Time Settings Field Name Explanation Advanced SIP Settings Codecs SettingsSipinfo Auto SIP Global Settings 3.2 IAX2 Stun Config Dial Peer SIP Line Using StunPage Web Interface Explanation Example Dial Peer ExamplesPhone Audio Page Feature Page Page Dial Plan Dial Plan Special Characters Phonebook Tables ContactGroup Option WEB Dial Remote Phonebook SettingFunction Keys Function KeyScreen Configuration Field Name Explanation Line Key Settings/Function Key SettingsProgrammable Key Settings Softkeys EXT Keys Maintenance Auto ProvisionPage Auto Provision Setting Dhcp Option SettingsPlug and Play Settings Syslog Phone Flash SettingsSyslog Settings Level Name DescriptionWeb Capture Config Setting Config SettingField Name Explanation Web Update UpdateSelect File URL of the logo file Access Configuration AccessReboot Security WEB FilterWEB Filter Firewall Firewall ConfigurationNetwork Address Translation NAT Application Layer Gateway ALG Settings FTP ALGPptp ALG NAT Table Option VPN Mode7.4 VPN Network Address Translation NAT TableSecurity LogoutDelete Security File Hardware SpecificationVoice Features Appendix SMS  DNS Dtmf  AutoNetwork Features  IP PBX  IMS WAN/LAN  Post  Http  FTP  Tftp  Https Maintenance and managementDigit-character map table