Cortelco C56 user manual Field Name Explanation

Field Name	Explanation
Phone number	There are two types of matching: Full Matching or Prefix Matching.
	In Full matching, the entire phone number is entered and then
	mapped per the Dial Peer rules.
	In prefix matching, only part of the number is entered followed by
	T. The mapping with then take place whenever these digits are
	dialed. Prefix mode supports a maximum of 30 digits.
Destination	Set Destination address. This is optional. For a peer to peer call,
	enter the destination IP address or domain name. To use a dial rule
	on the SIP2 line, enter 0.0.0.2. For SIP3 enter 0.0.0.3
Port	Set the Signaling port, the default is 5060.
Alias	Set the Alias. This is the text to be added, replaced, or deleted. It is
	optional.

Note: There are four types of aliases.

1)	Add: xxx – xxx will be dialed before any phone number.
2)	All: xxx – xxx will replace the phone number.
3)	Del: The characters will be deleted from the phone number.
4)	Rep: xxx – xxx will be substituted for the specified characters.
Call Mode		Select either SIP or IAX2 protocol.
Suffix		Characters to be added at the end of the phone number. This is
		optional.
		- 31 -