to switch to PPPoE mode. When the PPPoE icon at the top of the LCD stops blinking, the mode change is complete.
2.2.2Static IP Mode
1.Press and hold 1 for three seconds.
2.Press ENTER to confirm.
3.Press ENTER. The LCD will display “INPUT PASSWORD”.
4.Input the password (default is 123).
5.Press ENTER. The LCD will display” NETWORK”.
6.Press ENTER. The LCD will display “LAN”.
7.Press UP ARROW.
8.Press ENTER. The LCD will display “STATIC NET”.
9.Press ENTER. The LCD will display “IP”.
10.Press ENTER.
11.Press LEFT ARROW.
12.Input the IP address. Use “*” to enter the periods in the IP address.
13.Press ENTER. The LCD will display the IP address.
14.Press EXIT to return to the previous menu.
15.Press DOWN ARROW. The LCD will display “DNS2”.
16.Press ENTER.
17.Press LEFT ARROW.
18.Input the secondary DNS address.
19.Press ENTER. The LCD will display the DNS address.
20.Press EXIT to return to the previous menu.
21.Press DOWN ARROW. The LCD will display “DNS”.
22.Press ENTER.
23.Press LEFT ARROW.
24.Input the primary DNS address.
25.Press ENTER. The LCD will display the DNS address.
26.Press EXIT to return to the previous menu.
27.Press DOWN ARROW. The LCD will display “GATEWAY”.
28.Press ENTER.
29.Press LEFT ARROW.
30.Input the gateway IP address.
31.Press ENTER. The LCD will display the gateway address.
32.Press EXIT to return to the previous menu.
33.Press DOWN ARROW. The LCD will display “NETMASK”.
34.Press ENTER.
35.Press LEFT ARROW.
36.Input the netmask.
37.Press ENTER. The LCD will display the netmask.
38.Press EXIT four times.
39.Press DOWN ARROW until the LCD displays “SYSTEM”.
40.Press ENTER. The LCD will display “SAVE”.
-9 -