Voice over IP Configuration Examples
!Configure the serial interface interface serial 0/0
description serial interface type dce (provides clock) clock rate 2000000
ip address 172.16.1.123 no shutdown
Configuration for Router SLC
hostname saltlake |
| |
!Configure pots | dial | peer 1 |
1 pots | ||
119.... | ||
port 1/0/0 |
|
|
!Configure pots | dial | peer 2 |
2 pots | ||
119.... | ||
port 1/0/1 |
|
|
!Configure voip | dial | peer 3 |
3 voip | ||
555.... | ||
session target | ipv4:172.16.1.123 | |
!Configure the E&M interface
signal immediate operation
!Configure the serial interface interface serial 0/0
description serial interface type dte ip address 172.16.65.182
no shutdown
Note PBXs should be configured to pass all DTMF signals to the router. We recommend that you do not configure store and forward tone.
Note If you change the gain or the telephony port, make sure that the telephony port still accepts DTMF signals.