Cisco Systems VG202XM, VG204XM manual Using the setup Command

Page 18

Chapter 2 Configuring Your Voice Gateway Using the setup Command

Using the setup Command

Step 4 Determine the addressing plan for each network protocol.

Using the setup Command

The setup command is displayed in your PC terminal emulation program window.

Note If you make a mistake while using the setup command, you can exit and run the command again. Press Ctrl-C, and enter setup at the enable mode prompt (VG#).

Procedure

Step 1 Plug in the external power supply.

The system begins to display messages in your terminal emulation program window.

Caution The voice gateway does not enter setup mode during the initial configuration. During initial configuration, the voice gateway boots up in auto-configuration. You can only use the setup command to configure the voice gateway manually after the initial configuration. Using the setup command during the initial configuration erases the default configuration and must be avoided.

Caution Do not press any keys on the keyboard until the messages stop. The system interprets any keys pressed during this time as the first command typed when the messages stop, which might cause the voice gateway to power off and start over. It takes a few minutes for the messages to stop.

The messages look similar to the following example.

System configuration has been modified. Save? [yes/no]: n

Proceed with reload? [confirm]

*Apr 21 14:23:38.051: %SYS-5-RELOAD: Reload requested by console. Reload Reason: Reload Command.

System Bootstrap, Version 12.4(20080415:092610) [anyname-VG.V124_19_9_2_PIA9.14582.ios.sync 102], DEVELOPMENT SOFTWARE Copyright (c) 1994-2008 by cisco Systems, Inc.

VG202 platform with 131072 Kbytes of main memory

Upgrade ROMMON initialized

program load complete, entry point: 0x80020000, size: 0x1437d40 Self decompressing the image:

##########################################################################################

##########################################################################################

################################# [OK]

Restricted Rights Legend

Use, duplication, or disclosure by the Government is subject to restrictions as set forth in subparagraph

(c)of the Commercial Computer Software - Restricted Rights clause at FAR sec. 52.227-19 and subparagraph

Cisco VG202, Cisco VG202XM, Cisco VG204, and Cisco VG204XM Voice Gateways Software Configuration Guide

2-2

OL-16191-01

 

 

Page 17 Page 19
Image 18
Page 17 Page 19
Contents Americas Headquarters Text Part Number OL-16191-01Copyright 2008-2013 Cisco Systems, Inc. All rights reserved N T E N T S Changing the Configuration Register Manually A-5 Document Objectives AudienceConvention Description AccessibilityDocumentation Conventions Boldface fontRelated Documentation Cisco VG200 Series GatewaysViii About the Voice Gateways Port Numbering ConventionsBack Panel Feature Locations on the Cisco VG202 Chassis Chapter before you proceed to the next chapter Understanding Cisco IOS Software BasicsAbout Cisco IOS Software ReleaseGetting Help Command ModesCommand Mode Access Method VG Prompt Displayed Exit Method Exit , or logoutConfigure terminal Undoing a Command or FeatureSaving Configuration Changes Interface fast ethernetWhere to Go Next Typical Voice Gateway Deployment ScenarioUpgrading to a New Cisco IOS Release Page OL-16191-01 About Configuring Your Voice Gateway Preparing to Configure Your Cisco Voice GatewayProcedure Using the setup Command Determine the addressing plan for each network protocolEnter a hostname for the voice gateway Enter hostname VG VG204 Completing the Configuration OL-16191-01 Configuring the Hostname and Password Configuration guide and command reference publicationsRestriction Exit Verifying the Hostname and PasswordCommand or Action Purpose ExampleConfiguring Fast Ethernet Interfaces Enable Configure terminal Ip routingBefore You Begin Exit Ctrl-z Saves the configuration changes to Nvram so that they Saving Configuration ChangesEnable Copy running-config startup-config Ctrl-z Are not lost during resets, power cycles, or powerOL-16191-01 Configuring the Voice Interface PrerequisitesPrompt changes to the privileged Exec enable prompt VG# Restriction for Configuring Auto-Configuration Auto-Configuration With a Dhcp ServerEnable Configure terminal Ip address dhcpAuto-Configuration Without a Dhcp Server Voice service voip Fax protocol t38 nseforceCcm-manager config server tftpipaddress Ccm-manager sccp Configuration port Enables the Sccp and its related applicationsDownloads Cucm XML configuration files and enables Transcoding and conferencingEnables Cucm auto-configuration of the Cisco IOS Sccp Sccp ccm group group-numberDial-peer voice tags pots Service stcapp Command or Action Purpose Port Number Address Configuring the MAC Address ConventionLast Three Digits of the MAC 000 001 002 003Enters global configuration mode. You have entered Configuring CallsEnters privileged Exec mode Global configuration mode when the prompt changes toCall Waiting Three-Party ConferencingCaller ID Caller-id enable type Caller-id enable type ExitAllows the sending or receiving of caller ID information OL-16191-01 Entering the ROM Monitor Mode Enable Configure terminal Config-register value Exit ReloadAbout the ROM Monitor Commands Listing the ROM Monitor Commands Command DescriptionsReset or Recovering Boot and System ImagesCommand Description MeminfoChanging the Configuration Register Manually Using the Configuration RegisterAbout Changing the Configuration Register Changing the Configuration Register Using PromptsUsing the Console Download Function Command DescriptionAbout the Console Download Function Using Debug Commands Error ReportingContext-Displays processor context for example Exiting the ROM Monitor Mode Rommon 9 meminfo Main memory size 128 MBMeminfo A-8reset A-4 FiguresReset command ROM monitor Commands Debug commands
Related manuals
Manual 48 pages 51.2 Kb

VG202, VG204XM, VG204, VG202XM specifications

Cisco Systems has long been a leader in the realm of networking technology, providing innovative solutions for businesses of all sizes. Among its products, the Cisco VG202XM, VG204, VG204XM, and VG202 series stand out as vital components in voice gateway solutions for IP telephony applications.

The Cisco VG202XM and VG204 series are designed to facilitate the convergence of voice and data as businesses transition to VoIP (Voice over Internet Protocol). These voice gateways offer seamless integration with legacy telephony systems while enabling the deployment of advanced IP-based telephony features. They are particularly useful for organizations looking to preserve their existing investments in traditional telephony infrastructure while embracing modern communication technologies.

One of the main features of the VG202XM and VG204 series is their support for two-line interfaces, catering to varying deployment needs. The VG202 provides two FXS (Foreign Exchange Station) ports, which allow businesses to connect analog phones and fax machines directly. The VG204 enhances this capability by offering four FXS ports, accommodating larger user bases and providing more connections for local telephony equipment.

These gateways support an array of voice codecs and can handle up to 16 concurrent calls, ensuring high-quality voice communication in busy environments. Their integration with Cisco's Unified Communications Manager allows users to access a host of advanced telephony features such as call forwarding, voicemail, and conferencing.

On the technology front, the VG202XM and VG204 series support both SIP (Session Initiation Protocol) and H.323 protocols, making them versatile for varied network environments. They also offer advanced QoS (Quality of Service) capabilities, ensuring that voice traffic is prioritized over other types of data, which is essential in maintaining call clarity and reliability.

Additionally, the VG204XM variant adds built-in safety features, such as power over Ethernet (PoE), which eliminates the need for separate power supplies for connected devices. This not only streamlines deployment but also enhances the reliability of the voice system.

In terms of management, these devices are equipped with Cisco's user-friendly interface, which simplifies configuration and monitoring. They can be managed through various tools offered by Cisco, making it easier for IT departments to maintain and optimize their voice services.

Overall, the Cisco VG202XM, VG204, VG204XM, and VG202 series deliver robust, scalable, and reliable solutions for businesses aiming to leverage the benefits of voice gateways in their enterprise networks. These devices not only provide essential voice capabilities but also pave the way for future growth and integration in an increasingly digital world.
Top Page Image Contents