Cisco Systems VG202XM, VG204XM manual Enter hostname VG VG204

Page 20

Chapter 2 Configuring Your Voice Gateway Using the setup Command

Using the setup Command

Enter hostname [VG]: VG204

The enable secret is a password used to protect access to privileged EXEC and configuration modes. This password, after entered, becomes encrypted in the configuration.

Step 5 Enter an enable secret password. This password is encrypted (more secure) and cannot be seen when viewing the configuration:

The enable secret is a password used to protect access to privileged EXEC and configuration modes. This password, after entered, becomes encrypted in the configuration.

Enter enable secret: cisco

Step 6 Enter an enable password that is different from the enable secret password. This password is not encrypted (less secure) and can be seen when viewing the configuration:

The enable password is used when you do not specify an

enable secret password, with some older software versions, and some boot images.

Enter enable password: cisco

%Please choose a password that is different from the enable secret Enter enable password: cisco

Step 7 Enter the virtual terminal password, which prevents unauthenticated access to the voice gateway through ports other than the console port:

The virtual terminal password is used to protect access to the VG over a network interface. Enter virtual terminal password: cisco Configure SNMP Network Management? [yes]: n

Configure IP? [yes]:

Configure RIP routing? [yes]: n Configure bridging? [no]:

Step 8 Respond to the following prompts as appropriate for your network:

Do you want to configure FastEthernet0/0 interface? [yes]:

Use the 100 Base-TX (RJ-45) connector? [yes]:

Operate in full-duplex mode? [no]:

Configure IP on this interface? [yes]:

IP address for this interface: 9.13.38.150

Subnet mask for this interface [255.0.0.0] : 255.255.255.0

Class A network is 9.0.0.0, 24 subnet bits; mask is /24

Do you want to configure FastEthernet0/1 interface? [yes]: n

Would you like to go through AutoSecure configuration? [yes]: n

AutoSecure dialog can be started later using "auto secure" CLI

The following configuration command script was created:

hostname VG-202

enable secret 5 $1$Y0VQ$D8qM6vS3qId.BP3w.GjlE. enable password cisco

line vty 0 4 password cisco no snmp-server

!

ip routing no bridge 1

!

Cisco VG202, Cisco VG202XM, Cisco VG204, and Cisco VG204XM Voice Gateways Software Configuration Guide

2-4

OL-16191-01

 

 

Image 20
Contents Americas Headquarters Text Part Number OL-16191-01Copyright 2008-2013 Cisco Systems, Inc. All rights reserved N T E N T S Changing the Configuration Register Manually A-5 Document Objectives AudienceAccessibility Documentation ConventionsConvention Description Boldface fontRelated Documentation Cisco VG200 Series GatewaysViii About the Voice Gateways Port Numbering ConventionsBack Panel Feature Locations on the Cisco VG202 Chassis Understanding Cisco IOS Software Basics About Cisco IOS SoftwareChapter before you proceed to the next chapter ReleaseCommand Modes Command Mode Access Method VG Prompt Displayed Exit MethodGetting Help Exit , or logoutUndoing a Command or Feature Saving Configuration ChangesConfigure terminal Interface fast ethernetUpgrading to a New Cisco IOS Release Where to Go NextTypical Voice Gateway Deployment Scenario Page OL-16191-01 Procedure About Configuring Your Voice GatewayPreparing to Configure Your Cisco Voice Gateway Using the setup Command Determine the addressing plan for each network protocolEnter a hostname for the voice gateway Enter hostname VG VG204 Completing the Configuration OL-16191-01 Restriction Configuring the Hostname and PasswordConfiguration guide and command reference publications Verifying the Hostname and Password Command or Action PurposeExit ExampleBefore You Begin Configuring Fast Ethernet InterfacesEnable Configure terminal Ip routing Exit Ctrl-z Saving Configuration Changes Enable Copy running-config startup-config Ctrl-zSaves the configuration changes to Nvram so that they Are not lost during resets, power cycles, or powerOL-16191-01 Configuring the Voice Interface PrerequisitesPrompt changes to the privileged Exec enable prompt VG# Restriction for Configuring Auto-Configuration Auto-Configuration With a Dhcp ServerEnable Configure terminal Ip address dhcpCcm-manager config server tftpipaddress Ccm-manager sccp Auto-Configuration Without a Dhcp ServerVoice service voip Fax protocol t38 nseforce Enables the Sccp and its related applications Downloads Cucm XML configuration files and enablesConfiguration port Transcoding and conferencingEnables Cucm auto-configuration of the Cisco IOS Sccp Sccp ccm group group-numberDial-peer voice tags pots Service stcapp Command or Action Purpose Configuring the MAC Address Convention Last Three Digits of the MACPort Number Address 000 001 002 003Configuring Calls Enters privileged Exec modeEnters global configuration mode. You have entered Global configuration mode when the prompt changes toCaller ID Call WaitingThree-Party Conferencing Allows the sending or receiving of caller ID information Caller-id enable typeCaller-id enable type Exit OL-16191-01 Entering the ROM Monitor Mode Enable Configure terminal Config-register value Exit ReloadAbout the ROM Monitor Commands Listing the ROM Monitor Commands Command DescriptionsRecovering Boot and System Images Command DescriptionReset or MeminfoUsing the Configuration Register About Changing the Configuration RegisterChanging the Configuration Register Manually Changing the Configuration Register Using PromptsAbout the Console Download Function Using the Console Download FunctionCommand Description Context-Displays processor context for example Using Debug CommandsError Reporting Exiting the ROM Monitor Mode Rommon 9 meminfo Main memory size 128 MBMeminfo A-8reset A-4 FiguresReset command ROM monitor Commands Debug commands
Related manuals
Manual 48 pages 51.2 Kb

VG202, VG204XM, VG204, VG202XM specifications

Cisco Systems has long been a leader in the realm of networking technology, providing innovative solutions for businesses of all sizes. Among its products, the Cisco VG202XM, VG204, VG204XM, and VG202 series stand out as vital components in voice gateway solutions for IP telephony applications.

The Cisco VG202XM and VG204 series are designed to facilitate the convergence of voice and data as businesses transition to VoIP (Voice over Internet Protocol). These voice gateways offer seamless integration with legacy telephony systems while enabling the deployment of advanced IP-based telephony features. They are particularly useful for organizations looking to preserve their existing investments in traditional telephony infrastructure while embracing modern communication technologies.

One of the main features of the VG202XM and VG204 series is their support for two-line interfaces, catering to varying deployment needs. The VG202 provides two FXS (Foreign Exchange Station) ports, which allow businesses to connect analog phones and fax machines directly. The VG204 enhances this capability by offering four FXS ports, accommodating larger user bases and providing more connections for local telephony equipment.

These gateways support an array of voice codecs and can handle up to 16 concurrent calls, ensuring high-quality voice communication in busy environments. Their integration with Cisco's Unified Communications Manager allows users to access a host of advanced telephony features such as call forwarding, voicemail, and conferencing.

On the technology front, the VG202XM and VG204 series support both SIP (Session Initiation Protocol) and H.323 protocols, making them versatile for varied network environments. They also offer advanced QoS (Quality of Service) capabilities, ensuring that voice traffic is prioritized over other types of data, which is essential in maintaining call clarity and reliability.

Additionally, the VG204XM variant adds built-in safety features, such as power over Ethernet (PoE), which eliminates the need for separate power supplies for connected devices. This not only streamlines deployment but also enhances the reliability of the voice system.

In terms of management, these devices are equipped with Cisco's user-friendly interface, which simplifies configuration and monitoring. They can be managed through various tools offered by Cisco, making it easier for IT departments to maintain and optimize their voice services.

Overall, the Cisco VG202XM, VG204, VG204XM, and VG202 series deliver robust, scalable, and reliable solutions for businesses aiming to leverage the benefits of voice gateways in their enterprise networks. These devices not only provide essential voice capabilities but also pave the way for future growth and integration in an increasingly digital world.