Cisco Systems VG204XM, VG202XM manual Configuring Fast Ethernet Interfaces, Before You Begin

Page 25

Chapter 3 Configuring Your Voice Gateway Using the CLI

Configuring Fast Ethernet Interfaces

Using 1888 out of 126968 bytes

!

version XX.X

.

.

.

!

hostname VG204

!

enable secret 5 $1$60L4$X2JYOwoDc0.kqa1loO/w8/

.

.

.

Step 2 Check the hostname and encrypted password displayed near the top of the command output. Step 3 Exit global configuration mode and attempt to reenter it, using the new enable password:

VG# exit

.

.

.

VG con0 is now available Press RETURN to get started.

VG> enable

Password: guessme

VG#

Tip If you are having trouble, ensure the following:

Caps lock is off.

You entered the correct passwords. Passwords are case sensitive.

Configuring Fast Ethernet Interfaces

To configure a Fast Ethernet interface, use the configuration software provided with your voice gateway. Otherwise, for greatest power and flexibility, use configuration mode (manual configuration).

This section describes basic Fast Ethernet interface configuration, including enabling the interface and specifying IP routing. Depending on your own requirements and the protocols you plan to route, you might also need to enter other configuration commands.

Before You Begin

Connect a console to the voice gateway.

Power on the voice gateway by plugging in the external power supply.

SUMMARY STEPS

1.enable

2.configure terminal

3.ip routing

Cisco VG202, Cisco VG202XM, Cisco VG204, and Cisco VG204XM Voice Gateways Software Configuration Guide

 

OL-16191-01

3-3

 

 

 

Image 25
Contents Text Part Number OL-16191-01 Americas HeadquartersCopyright 2008-2013 Cisco Systems, Inc. All rights reserved N T E N T S Changing the Configuration Register Manually A-5 Audience Document ObjectivesDocumentation Conventions AccessibilityConvention Description Boldface fontCisco VG200 Series Gateways Related DocumentationViii Port Numbering Conventions About the Voice GatewaysBack Panel Feature Locations on the Cisco VG202 Chassis About Cisco IOS Software Understanding Cisco IOS Software BasicsChapter before you proceed to the next chapter ReleaseCommand Mode Access Method VG Prompt Displayed Exit Method Command ModesGetting Help Exit , or logoutSaving Configuration Changes Undoing a Command or FeatureConfigure terminal Interface fast ethernetTypical Voice Gateway Deployment Scenario Where to Go NextUpgrading to a New Cisco IOS Release Page OL-16191-01 Preparing to Configure Your Cisco Voice Gateway About Configuring Your Voice GatewayProcedure Determine the addressing plan for each network protocol Using the setup CommandEnter a hostname for the voice gateway Enter hostname VG VG204 Completing the Configuration OL-16191-01 Configuration guide and command reference publications Configuring the Hostname and PasswordRestriction Command or Action Purpose Verifying the Hostname and PasswordExit ExampleEnable Configure terminal Ip routing Configuring Fast Ethernet InterfacesBefore You Begin Exit Ctrl-z Enable Copy running-config startup-config Ctrl-z Saving Configuration ChangesSaves the configuration changes to Nvram so that they Are not lost during resets, power cycles, or powerOL-16191-01 Prerequisites Configuring the Voice InterfacePrompt changes to the privileged Exec enable prompt VG# Auto-Configuration With a Dhcp Server Restriction for Configuring Auto-ConfigurationIp address dhcp Enable Configure terminalVoice service voip Fax protocol t38 nseforce Auto-Configuration Without a Dhcp ServerCcm-manager config server tftpipaddress Ccm-manager sccp Downloads Cucm XML configuration files and enables Enables the Sccp and its related applicationsConfiguration port Transcoding and conferencingSccp Sccp ccm group group-number Enables Cucm auto-configuration of the Cisco IOSDial-peer voice tags pots Service stcapp Command or Action Purpose Last Three Digits of the MAC Configuring the MAC Address ConventionPort Number Address 000 001 002 003Enters privileged Exec mode Configuring CallsEnters global configuration mode. You have entered Global configuration mode when the prompt changes toThree-Party Conferencing Call WaitingCaller ID Caller-id enable type Exit Caller-id enable typeAllows the sending or receiving of caller ID information OL-16191-01 Enable Configure terminal Config-register value Exit Reload Entering the ROM Monitor ModeAbout the ROM Monitor Commands Command Descriptions Listing the ROM Monitor CommandsCommand Description Recovering Boot and System ImagesReset or MeminfoAbout Changing the Configuration Register Using the Configuration RegisterChanging the Configuration Register Manually Changing the Configuration Register Using PromptsCommand Description Using the Console Download FunctionAbout the Console Download Function Error Reporting Using Debug CommandsContext-Displays processor context for example Rommon 9 meminfo Main memory size 128 MB Exiting the ROM Monitor ModeFigures Meminfo A-8reset A-4Reset command ROM monitor Commands Debug commands
Related manuals
Manual 48 pages 51.2 Kb

VG202, VG204XM, VG204, VG202XM specifications

Cisco Systems has long been a leader in the realm of networking technology, providing innovative solutions for businesses of all sizes. Among its products, the Cisco VG202XM, VG204, VG204XM, and VG202 series stand out as vital components in voice gateway solutions for IP telephony applications.

The Cisco VG202XM and VG204 series are designed to facilitate the convergence of voice and data as businesses transition to VoIP (Voice over Internet Protocol). These voice gateways offer seamless integration with legacy telephony systems while enabling the deployment of advanced IP-based telephony features. They are particularly useful for organizations looking to preserve their existing investments in traditional telephony infrastructure while embracing modern communication technologies.

One of the main features of the VG202XM and VG204 series is their support for two-line interfaces, catering to varying deployment needs. The VG202 provides two FXS (Foreign Exchange Station) ports, which allow businesses to connect analog phones and fax machines directly. The VG204 enhances this capability by offering four FXS ports, accommodating larger user bases and providing more connections for local telephony equipment.

These gateways support an array of voice codecs and can handle up to 16 concurrent calls, ensuring high-quality voice communication in busy environments. Their integration with Cisco's Unified Communications Manager allows users to access a host of advanced telephony features such as call forwarding, voicemail, and conferencing.

On the technology front, the VG202XM and VG204 series support both SIP (Session Initiation Protocol) and H.323 protocols, making them versatile for varied network environments. They also offer advanced QoS (Quality of Service) capabilities, ensuring that voice traffic is prioritized over other types of data, which is essential in maintaining call clarity and reliability.

Additionally, the VG204XM variant adds built-in safety features, such as power over Ethernet (PoE), which eliminates the need for separate power supplies for connected devices. This not only streamlines deployment but also enhances the reliability of the voice system.

In terms of management, these devices are equipped with Cisco's user-friendly interface, which simplifies configuration and monitoring. They can be managed through various tools offered by Cisco, making it easier for IT departments to maintain and optimize their voice services.

Overall, the Cisco VG202XM, VG204, VG204XM, and VG202 series deliver robust, scalable, and reliable solutions for businesses aiming to leverage the benefits of voice gateways in their enterprise networks. These devices not only provide essential voice capabilities but also pave the way for future growth and integration in an increasingly digital world.