Cisco Systems VG202XM, VG204 Verifying the Hostname and Password, Exit, Command or Action Purpose

Chapter 3 Configuring Your Voice Gateway Using the CLI

Configuring the Hostname and Password

6.exec-timeoutminutes seconds

7.exit

DETAILED STEPS

	Command or Action	Purpose
Step 1
	enable	Enters privileged EXEC mode.
	Example:
	VG# enable
Step 2
	configure terminal	Enters global configuration mode. You have entered
		global configuration mode when the prompt changes to
	Example:	VG(config)#.
	VG# configure terminal
Step 3
	hostname name	Changes the name of the voice gateway to a meaningful
		name.
	Example:
	VG(config)# hostname VG204
Step 4
	enable secret password	Enters an enable secret password. This password
		provides access to privileged EXEC mode. When you
	Example:	press enter at the user EXEC prompt (VG>), you must
		enter the enable secret password to gain access to
	VG(config)# enable secret guessme
		configuration mode. Substitute your enable secret
		password for guessme.
Step 5
	line configuration line	Enters line configuration mode to configure the console
		port. When you enter line configuration mode, the
	Example:	prompt changes to VG(config-line)#.
	VG(config)# line configuration 0
Step 6
	exec-timeoutminutes seconds	Prevents the voice gateway’s EXEC facility from timing
		out if you do not type any information on the console
	Example:	screen for an extended period.
	VG(config-line)# exec-timeout 0 0
Step 7
	exit	Exits to global configuration mode.
	Example:
	VG(config-line)# exit

Verifying the Hostname and Password

		To verify that you configured the correct hostname and password, follow these steps.
		Procedure
	Step 1	Enter the show config command:
		VG# show config
	Cisco VG202, Cisco VG202XM, Cisco VG204, and Cisco VG204XM Voice Gateways Software Configuration Guide
3-2		OL-16191-01