Cortelco C60 user manual Sipinfo Auto

Subscribe For MWI	If enabled, the phone will send Message Waiting Indication
	(MWI) Subscribe message to the SIP Server
MWI Number	Specify the number to call to retrieve Voice Messages.
Subscribe Period	Time interval between MWI Subscribe Messages.
Conference Type	Choose Conference Type, either local or network
Conference Number	Number to dial to access network conference server.		Not needed
	if Local conference mode is chosen
Registration Expires	SIP re-registration time. Default is 3600 seconds.		If the server
	requests a different time, the phone will change to that value.
Enable Service Code	Enables or disables the services described below. These codes
	will be sent to the SIP server to activate or deactivate the service.
DND On Code	Do Not Disturb (DND) – When this hot key is pressed, all calls to
	the extension to be rejected by the server. The incoming call
	record will not be displayed in the Call History.
DND Off Code	Disable Server DND as described above.
Always CFwd On Code	Always Call Forward On – When this function is enabled, the
	server will forward all calls to a designated number. The
	incoming call record will not be displayed in the Call History.
Always CFwd Off Code	Disable Server Always CFwd as described above.
Busy CFwd On Code	Busy Call Forward On - When this function is enabled, the server
	will forward all calls to a designated number if the telephone is
	busy. The call record will not be displayed in Call History.
Busy CFwd Off Code	Disable Server Busy CFwd as described above.
No Ans. CFwd On Code	No Answer Call Forward On - When this function is enabled, the
	server will forward all calls to a designated number if there is no
	answer within a designated time. The incoming call record will not
	be displayed in the Call History.
No Ans. CFwd Off Code	Disable Server No Ans. CFwd as described above.
Anonymous On Code	Anonymous On – When this function is enabled, the server will
	allow the phone to make anonymous calls. In other words
	“Anonymous” will be transmitted for Caller ID.
Anonymous Off Code	Disable Anonymous Calling function described above.
Keep Alive Type	Specifies the NAT keep alive type. If OPTION is selected, the
	phone will send OPTION sip messages to the server every NAT
	Keep Alive Period. The server will then respond with 200 OK.
	If UDP is selected, the phone will send a UDP message to the
	server every NAT Keep Alive Period.
Keep Alive Interval	Set the NAT Keep Alive Interval. Default is 60 seconds
User Agent	Set SIP User Agent value.
DTMF Type	DTMF sending mode. There are four modes:
	 In-band (Relay)
		RFC2833
		SIP_INFO
		AUTO
		45