Cortelco C60 user manual

Ring from Headset	If this is enabled and a headset is connected, ring tone will be played
	in the headset.
Enable Intercom Mute	If enabled, mutes incoming calls during an intercom call
Enable Intercom Barge	If enabled, the phone will auto-answer an intercom call during an
	outside call. If an intercom call is established, a second intercom
	call will be rejected.
DND Return Code	Specify SIP Code returned for DND.	Default is 480 - Temporarily
	Not Available.
Busy Return Code	Specify SIP Code returned for Busy.	Default is 486 – Busy Here.
Reject Return Code	Specify SIP Code returned for Rejected call. Default is 603 –
	Decline.
Active URI Limit IP	IP address of the server for the Action URL messages described
	below.
Push XML Server	IP address for XML server which can send display content to the
	phone.
Enable Call Waiting	Enables audible notification of call waiting.
Tone
Action URL Settings	URL for various actions performed by the phone. These actions
	are recorded and sent as xml files to the server. Sample format is
	http://InternalServer /FileName.xml
Block Out Settings	Add or Delete Blocked numbers – Enter the prefix of numbers
	which should not be dialed by the phone. For example, if 001 is
	entered, the phone will not dial any numbers beginning with 001.
	X and x are wildcards which match single digits. For example, if
	4xxx or 4XXX is entered, the phone will not dial any 4 digit
	numbers beginning with 4. It will dial numbers beginning with 4
	which are longer or shorter than 4 digits.

56