| Auto Provision Setting |
|
|
Field Name | Explanation |
Current Config Version | Show the current config file’s version. If the version of |
| configuration downloaded is higher than this, the configuration will |
| be upgraded. If the endpoints confirm the configuration by the |
| Digest method, the configuration will not be upgraded unless it |
| differs from the current configuration. |
|
|
Common Config | Show the common config file’s version. If the configuration |
Version | downloaded and this configuration are the same, the auto provision |
| will stop. If the endpoints confirm the configuration by the Digest |
| method, the configuration will not be upgraded unless it differs from |
| the current configuration. |
|
|
CPE Serial Number | Serial number of the phone |
|
|
User | Username for configuration server. Used for FTP/HTTP/HTTPS. |
| If this is blank the phone will use anonymous. |
|
|
Password | Password for configuration server. Used for FTP/HTTP/HTTPS. |
|
|
Config Encryption Key | Encryption key for the configuration file |
|
|
Common Config | Encryption key for common configuration file |
Encryption Key |
|
|
|
Save Autoprovision | Save the Autoprovision username and password in the phone until |
Information | the server url changes |
|
|
DHCP Option Settings
Field Name
Explanation
DHCP Option Setting | The phone supports configuration from Option 43, Option 66, or a |
| Custom DHCP option. It may also be disabled. |
|
|
Custom DHCP Option | Custom option number. Must be from 128 to 254. |
|
|
| Plug and Play Settings |
|
|
Enable PnP | If this is enabled, the phone will send SIP SUBSCRIBE messages to |
| a multicast address when it boots up. Any SIP server understanding |
| that message will reply with a SIP NOTIFY message containing the |
| Auto Provisioning Server URL where the phones can request their |
| configuration. |
|
|
PnP Server | PnP Server Address |
|
|
| 67 |