Cisco Systems OL-5378-01 manual Deleting a Phone, 45-11

Chapter 45 Cisco IP Phone Configuration

Configuring Cisco IP Phones

•Cisco IP Phones, Cisco CallManager System Guide

•Phone Configuration Checklist, Cisco CallManager System Guide

Deleting a Phone

To delete a Cisco IP Phone by using Cisco CallManager Administration, perform the following procedure.

Before You Begin

If you try to delete a phone that is in use, Cisco CallManager displays an error message. To find out which directory numbers are using the phone, click the Dependency Records link from the Phone Configuration window. For more information about dependency records, see the “Accessing Dependency Records” section on page A-1. Before deleting a phone that is currently in use, you should perform either or both of the following tasks:

•Assign a different dir to any media resource groups that are using the media termination point that you want to delete. See the “Updating a Media Resource Group” section on page 28-5.

•Delete the media resource groups that are using the media termination point that you want to delete. See the “Deleting a Media Resource Group” section on page 28-7.

Procedure

Step 1 Choose Device > Phone.

The Find and List Phones window displays.

Step 2 To locate a specific phone, enter search criteria and click Find.

A list of phones that match the search criteria displays as illustrated in

Figure 45-3.