Cisco Systems OL-5378-01 manual 45-21

Chapter 45 Cisco IP Phone Configuration

	Configuring Cisco IP Phones
Table 45-1 Phone Configuration Settings (continued)
Field	Description
Proxy Server	Enter the host and port (for example,
	proxy.cisco.com:80) that are used to proxy HTTP
	requests for access to non-local host addresses from the
	phone HTTP client.
	If the phone receives a URL such as www.cisco.com in a
	service and the phone is not configured in the cisco.com
	domain, the phone uses the proxy server to access the
	URL. If the phone is configured in cisco.com domain, the
	phone accesses the URL without using the proxy because
	the phone is in the same domain as the URL.
	If you do not configure this URL, the phone attempts to
	connect directly to the URL.
	Leave this field blank to accept the default setting.
	Cisco CallManager does not display this field for
	Cisco IP Phone 7905.
Idle	Enter the URL that displays on the Cisco IP Phone 7960
	and Cisco IP Phone 7940 LCD when the phone has not
	been used for the time specified in Idle Timer field. For
	example, you can display a logo on the LCD when the
	phone has not been used for 5 minutes.
	Leave this field blank to accept the default setting.
	Cisco CallManager displays this field only for
	Cisco IP Phone 7960 and 7940 models.
Idle Timer (seconds)	Enter the time (in seconds) that you want to elapse before
	the URL that is specified in the Idle field displays.
	Leave this field blank to accept the value of the Idle URL
	Timer enterprise parameter.
	Cisco CallManager displays this field only for
	Cisco IP Phone 7960 and 7940 models.

Extension Mobility (Device Profile) Information

Enable Extension Mobility Feature

Check this check box if this phone supports extension mobility.

	Cisco CallManager Administration Guide
OL-5378-01		45-21