Cisco Systems OL-5378-01 manual 45-32

Chapter 45 Cisco IP Phone Configuration

Configuring Directory Numbers

Step 3 Click the name of the phone to update.

The Phone Configuration window displays.

Step 4 From the Directory Numbers list, click the line that you want to update. The Directory Number Configuration window displays.

Note If your phone uses a Cisco IP Phone 7914 Expansion Module, the

Directory Numbers list displays the lines for the phone and for the

Cisco IP Phone 7914 Expansion Module.

Step 5 Update the appropriate settings as described in Table 45-3.

Step 6 Click Update.

Step 7 For the changes to take effect, click Restart Devices.

A message indicates the number of devices that you want to restart. Step 8 Click OK to restart the devices or click Cancel to cancel the process.

Note Devices restart as soon as possible. During this process,

Cisco CallManager may drop calls on gateways.

Related Topics

•Cisco IP Phone Configuration, page 45-1

•Gateway Configuration, page 44-1

•Finding a Phone, page 45-28

•Adding a Phone, page 45-4

•Adding a Directory Number, page 45-30

•Deleting a Directory Number, page 45-33

•Directory Number Configuration Settings, page 45-34

•Cisco IP Phones, Cisco CallManager System Guide

•Phone Features, Cisco CallManager System Guide

•Phone Configuration Checklist, Cisco CallManager System Guide