Chapter 8 Monitoring the Cisco Unified IP Phone Remotely
Streaming Statistics
Streaming Statistics
A Cisco Unified IP Phone can stream information to and from up to three devices simultaneously. A phone streams information when it is on a a call or running a service that sends or receives audio or data.
The streaming statistics areas on a phone’s web page provide information about the streams. Most calls use only one stream (Stream 1), but some calls use two or three stream. For example, a barged call uses Stream 1 and Stream 2.
To display a Streaming Statistics area, access the web page for the phone as described in the “Accessing the Web Page for a Phone” section on page
Table
Table
|
| Item | Description | ||
|
|
|
| ||
|
| Remote Address | IP address and UDP port of the destination of the | ||
|
|
| stream. | ||
|
|
|
| ||
|
| Local Address | IP address and UPD port of the phone. | ||
|
|
|
| ||
|
| Start Time | Internal time stamp indicating when | ||
|
|
| Cisco Unified Communications Manager requested | ||
|
|
| that the phone start transmitting packets. | ||
|
|
|
| ||
|
| Stream Status | Indication of whether streaming is active or not. | ||
|
|
|
| ||
|
| Host Name | Unique, fixed name that is automatically assigned to | ||
|
|
| the phone based on its MAC address. | ||
|
|
|
| ||
|
| Sender Packets | Total number of RTP data packets transmitted by the | ||
|
|
| phone since starting this connection. The value is 0 if | ||
|
|
| the connection is set to receive only mode. | ||
|
|
|
| ||
|
| Sender Octets | Total number of payload octets transmitted in RTP data | ||
|
|
| packets by the phone since starting this connection. | ||
|
|
| The value is 0 if the connection is set to receive only | ||
|
|
| mode. | ||
|
|
|
| ||
|
| Sender Codec | Type of audio encoding used for the transmitted | ||
|
|
| stream. | ||
|
|
|
|
|
|
| Cisco Unified IP Phone |
|
| ||
| |||||
|
|
| |||
|
|
| |||