Aastra Telecom 55I, 57I CT Backup Proxy/Registrar Support, How it Works, SIP Server SRV Lookup

Page 173

Configuring Network and Session Initiation Protocol (SIP) Features

Global SIP Settings

Backup Proxy/Registrar Support

The IP phones support a backup SIP proxy and backup SIP registrar feature. If the primary server is unavailable, the phone automatically switches to the backup server allowing the user's phone to remain in service.

How it Works

All SIP registration messages are sent to the primary registrar first. If the server is unavailable, then a new registration request is sent to the backup registrar. This also applies to registration renewal messages, which try the primary server before the backup.

Similarly, any outgoing calls attempt to use the primary proxy first, then the backup if necessary. In addition, subscriptions for BLF, BLA, and explicit MWI can also use the backup proxy when the primary fails. Outgoing calls and the previously mentioned subscriptions behave the same as registrations, where the primary proxy is tried before the backup.

You can configure the backup SIP proxy on a global or per-line basis via the configuration files or the Aastra Web UI.

SIP Server (SRV) Lookup

The SIP SRV Lookup feature allows you to configure the IP phone to perform a DNS server lookup on a SIP proxy, a SIP registrar, or a SIP outbound proxy.

The IP phone performs an SRV lookup when the IP address of the server is FQDN and the corresponding port is 0.

For example, if the phone is configured with sip proxy ip of "ana.aastra.com", and sip proxy port of "0", the SRV lookup may return multiple servers, based on the priorities if one is selected as primary and others are selected as secondary.

However, if the IP address is an FQDN and the corresponding server port is non-zero, then the phone performs a DNS "A" Name Query to resolve the FQDN into dot notation form.

If the IP address is a valid dot notation and the port is zero, then a default port 5060 is used.

Configuring the IP Phones

41-001160-00, Release 2.1, Rev 04

4-49

Image 173

Contents SIP IP Phone Page Software License Agreement Page Contents Contents Chapter Configuring Operational Features 113 Chapter Configuring Advanced Operational Features Chapter Troubleshooting 100 Appendix B Configuration Server Setup Appendix E Sample BLF Softkey Settings Limited Warranty Audience IntroductionOther Documentation For Go to Chapters and appendixes in this guidePage Topic TopicsReferences DescriptionReference Optional AccessoriesFor 53i, 55i, 57i, and 57i CT For 55i, 57i, and 57i CT 536M Expansion ModuleModel 53i IP Phone 53i Phone FeaturesKeys Key Description 53i Key DescriptionsDirectory Model 55i IP Phone 55i Phone Features55i Key Descriptions Icom Dial Model 57i and 57i CT IP Phone 57i and 57i CT Phone Features57i and 57i CT Key Descriptions Options List Accesses another extension on the network Accesses the last 200 calls receivedApplications and voicemail, provided by third parties Alphabetical orderFunction # Function Description 57i CT Cordless Handset Features57i CT Cordless Handset Key Descriptions Softkeys Installation Considerations Firmware Installation InformationInstallation Requirements Configuration Server Requirement IP Phone Associated Model Firmware Firmware and Configuration FilesConfiguration File Precedence Step Action Installing the Firmware/Configuration FilesPage Configuration Interface Methods IP Phone UI Configuration Methods57i/57i CT Options KeyFrom the 53i, 55i, or 57i/57i CT Using the Options KeyFrom the 57i CT handset On the 55i, 57i, 57i CTHTTP/HTTPS Support Aastra Web UIHttps Server HTTP/HTTPS Client and Server SupportHttps Client Using Https via the Aastra Web UI IP address or host name Accessing the Aastra Web UI55i Network Status Window Logout button Operation StatusExpansion Module N ResetHandset Keys DirectoryCall Forward Basic SettingsPreferences Advanced Settings Troubleshooting To disable the Aastra Web UIEnabling/Disabling the Aastra Web UI TLS SupportReferences Configuration Files Administrator OnlyUsing the Configuration Files Directory 1 companydirectory Directory 2 mypersonaldirectory Administrator Options Administrator IP Phone UI Options Options-Administrator Menu using the default passwordReferences Administrator MenuSimplified IP Phone UI Options Menu Handset PairingFull Options Menu Simplified Options Menu Phone StatusConfiguring the Simplified IP Phone UI Options Menu Aastra Web UI Options Administrator Web UI MenuAdvanced Settings Operation-ResetBasic Settings-Preferences-General Configuration File Options Phone Status via IP Phone UI Phone StatusPhone Status Screen for 53i Phone Phone Status Screen for 55i, 57i, and 57i CT PhonesLAN Port IP&MAC AddressesPC Port Firmware InfoFirmware Information Network AttributesHardware Information Restarting Your Phone Restarting the Phone Using the IP Phone UISelect Restart Phone ForClick on Operation-Reset-Phone Restarting the Phone Using the Aastra Web UISetting Factory Defaults on the Phone Set Phone to Factory Defaults/Erase Local ConfigurationSetting Factory Defaults Using the IP Phone UI Select Factory DefaultSettings Factory Defaults Using the Aastra Web UI Select Erase Local Config Erasing the Phone’s Local ConfigurationAastra Web UI Parameter Aastra Web UI Configuration Files Description Basic SettingsGeneral Settings Available on the 55i, 57i, and 57i CT only This feature on the Basic Preferences screen isParameter Aastra Web UI Configuration Files DescriptionIncoming/Outgoing Intercom Calls Parameter Description Aastra Web UI Configuration FilesIncoming Intercom Settings all models Outgoing Intercom Settings 55i, 57i, and 57i CT only Intercom line parameter Mapping on Key MappingRing Tones Priority Alerting SettingsOptions Call Pickup BLF or XML Call Interception on Directed Call Pickup DCPTime and Date Auto Call Distribution ACD SettingsLangfr-ca.txt LanguageLanges.txt Langde.txtNetwork Settings Dhcp Basic Network SettingsParameter Parameters IP Phone UI Aastra Web UI Configuration Files DescriptionConfiguring LAN and PC Port Options Advanced Network SettingsConfiguring NAT Address Network Time Servers on Server1, time server2, and timeHttps SIP Type of Service ToS, DscpLAN Port Settings Port Global SettingsWhere the Dscp value range is Example PC Port Settings PortBasic SIP Authentication Settings SIP SettingsOptions Line Appearance BLA 55i Basic SIP Network Settings OFF URI Advanced SIP Settings optional on Advanced SIP SettingsLine Number in Register Messages on Parameter Parameters Registration Renewal Broadsoft Servers on You can configure the following RTP settings RTP SettingsReal-time Transport Protocol RTP Settings on IP Phone Available Model Line SettingsIP Phone Model Softkeys Expansion Module Programmable Keys Softkeys, Programmable Keys, Expansion Module KeysAction URI Download Protocol Settings Configuration Server SettingsTo the FTP server. See the following Http path Https path Mode Auto resync mode Auto-Resync SettingsSection, Automatic Update XML Push Server List Approved IP Addresses Firmware Update Features Configuring the IP Phones Configuring the IP Overview Basic Network Settings Network SettingsHttp Protocol Format ExamplesDNS Caching Configuring DhcpSelect Network Settings Select Administrator MenuConfiguring Network Settings Manually Configuring Aastra Web UI Half-Duplex 10Mbps or 100Mbps Configuring LAN and PC Port NegotiationAuto-negotiation Select LAN Port Link Configuring the LAN Port and PC PortFull-Duplex 10Mbps or 100Mbps Select PC Port Link Default is AutoNegotiationDefault is Auto Negotiation To save your settings Network Address Translation NAT Advanced Network SettingsNortel Proxy/Registrar NAT router configurationSBC or ALG proxy/registrar Other proxy/registrarsNortel Networks NAT Configuring Nortel NAT optionalSelect Restart 41-001160-00, Release 2.1, Rev Aastra Web UI Select NAT RTP Port Configuring NAT Address and Port optionalSelect Network Settings Select Static NAT Aastra Web UI Https Client/Server Configuration Configuring Https Client and Server Settings Configure Https Server Configure Https ClientTSL Universal Plug and Play UPnP for remote phones Upnp manager Upnp gateway Sip nat rtp port Configuring UPnP optionalSelect Restart Select Network Settings Select NAT SettingsAastra Web UI Virtual LAN optional PC Port GlobalLAN Port Dscp Range/VLAN Priority Dscp Range/VLAN Priority MappingVlan Priority RangeProtocol Default Dscp Name Configuring Type of Service ToS/DSCP optionalSelect Network Settings Select Type of Service Dscp ToS FieldSelect Restart Configuring Select Network Settings Select Vlan Settings Configuring Vlan optionalSelect Vlan Enable Select Phone Vlan Select Vlan PrioritySelect Phone Vlan To set Vlan ID and priority for LAN Port PortSIP Priority RTP Priority Rtcp Priority To set Vlan ID and priority for PC Port PortSelect PC Port Priority To set Vlan ID and priority for the LAN Port Port Step Action Click on Advanced Settings-Network-VLANTo set Vlan ID and priority for the PC Port Port Select Timer Server 1, Timer Server 2, or Time Server Configuring NTP Servers optionalNetwork Time Servers Select Preferences Select Time and Date Select Time ServerConfiguring the IP Phones To save your changes Global SIP Settings SIP Global Authentication Parameters Basic SIP SettingsSIP Global Parameters SIP Global Network ParametersSIP Per-Line Parameters SIP Per-Line Authentication ParametersIP Phone UI Parameters Aastra Web UI Parameters SIP Per-Line Network ParametersSIP Precedence Example SIP Server SRV Lookup Backup Proxy/Registrar SupportHow it Works Configuring Basic SIP Network Settings optional Enabling/Disabling the Use of the Registrar Server Configuring Proxy IP and Proxy PortConfiguring Registrar IP and Registrar Port Phones Configuring the IP Phones To configure SIP authentication settings John Burns 57i53i Lab PhoneTo configure SIP network settings To save your changes Aastra Web UI Parameters Configuration File Parameters Advanced SIP Settings optionalConfiguring Advanced SIP Settings Configuring the IP Phones Step Action Configuring the IP Phones Configuring the IP Phones Real-time Transport Protocol RTP Settings Basic Codecs G.711 u-Law, G.711 a-Law, G.729 RTP PortBit Rate Algorithm Packetizatio Silence Time Suppression Default Codec SettingsCustomized Codec Preference List Attribute Value Customized Codec SettingsOut-of-Band Dtmf RTP Encryption Dtmf MethodSilence Suppression Configuring RTP Features Configuring the IP Phones Per-Line Settings Step Action Click on Advanced Settings-Line N-RTP SettingsPhones Autodial Settings Per-Line Configuration Configuring AutoDial Using the Configuration FilesGlobal Configuration Click on Advanced Settings-Global SIP-Autodial Settings Configuring Autodial Using the Aastra Web UIGlobal Configuration Click on Advanced Settings-Line 1 9-Autodial Settings Per-Line ConfigurationConfiguring the IP Phones Select Download Protocol Configuring the Configuration Server ProtocolSelect Configuration Server Use Tftp Use FTP Use Http Use Https Tftp Settings FTP Settings Http Settings Https SettingsTftp Settings Select Primary Tftp Use the following table to configure the applicable serverFTP Settings Select FTP Server Select FTP PasswordSelect Download Path Https Settings Select Http Client Select Download ServerStep Action Click on Advanced Settings-Configuration Server Tftp Select Operation-Reset and click Configuring the IP Phones Operational IP Phone Features Features Configuring Operational Features Select User Password User PasswordsConfiguring a User Password Click on Operation-User Password Click on Operation-Phone Lock Resetting a User PasswordOperational IP Phone Features Procedure Administrator PasswordsLocking/Unlocking the Phone Lock the phone Locking/Unlocking the Phone Using the IP Phone UISelect Phone Lock Unlock the phoneLocking/Unlocking the Phone Using the Aastra Web UI FeaturesConfiguring a Lock/Unlock Key Using the Configuration Files Click on Operation-Programmable Keys Configuring a Lock/Unlock Key using the Aastra Web UIClick on Operation-Softkeys and XML Using the Configured Lock/Unlock Key on the IP Phone Emergency Number Description Defining an Emergency Dial PlanConfiguring an Emergency Dial Plan Daylight Savings Time DST Information Feature Method of configurationTime and Date Set Date and Date Format Set Time and Time FormatSelect Time Zone Set Time Zone16 For Set Daylight Savings TimeClick on Basic Settings-Preferences-Time and Date Setting Loading Language Packs Loading Language Packs via the Configuration File mac.cfgLanguage Example Loading Language Packs via the Aastra Web UI Specifying the Language to Use Step Action Press Operational IP Phone FeaturesSpecifying the Language to Use in the Aastra Web UI Click on Basic Settings-Preferences-Language SettingsLoading the Language Pack Aastra Web UI displays all screens in the language you chose Locking IP Phone Keys FeaturekeyN lockedTopsoftkeyN locked PrgkeyN lockedLocking the IP Phone Keys Local Dial Plan Symbol DescriptionPrefix Dialing Dial Plan ExampleSIP Dial Plan Terminator Digit TimeoutClick on Basic Settings-Preferences To save your changes Sprecode Pickupsprecode Park/Pickup Static Configuration 55i, 57i, 57i CT onlyPark Calls/Pick Up Parked Calls How It displays on the Phone Park/Pickup Call Server Configuration ValuesPark Call Pickup Call 55i, 57i, 57i CT only Configuring Park /Pickup using Static ConfigurationOperational Click on Basic Settings-Preferences-GeneralSuppressing Dtmf Playback Configuring Suppression of Dtmf PlaybackClick on Operation-Reset Display Dtmf Digits Configuring Display Dtmf DigitsOperational Call Waiting/Call Waiting Tone Call Waiting Tone Configuring Call Waiting/Call Waiting ToneClick on Basic Settings- Preferences-General Stuttered Dial Tone Configuring Stuttered Dial ToneOperational IP Phone Features XML Beep Support Configuring XML Beep SupportOperational IP Phone Features Configuring Status Scroll Delay Status Scroll DelayOperationalIPPhone How it Works Configuring Incoming Call Interrupts DialingIncoming Call Interrupts Dialing Features Configuring the Goodbye Key to Cancel Incoming Calls Goodbye Key Cancels Incoming CallFor the 55i, 57i, and 57i CT ForFeatures Mapping Lines Configuring UPnP Mapping LinesUPnP Mapping Lines for remote phones Features Configuring Message Waiting Indicator MWI Message Waiting Indicator LineClick on Basic Settings- Preferences-General Outgoing Intercom Calls Configuration File Parameters Web UI ParametersIncoming/Outgoing Intercom with Auto-Answer and Barge Incoming Intercom Calls Delay before Auto-AnswerMicrophone Mute Auto-Answer/Play Warning ToneAllow Barge Configuring Intercom Calls SettingsConfiguration Files Incoming intercom settings FeaturesOperational IP Phone Features Enabling/Disabling Redial, Xfer, and Conf Keys Redial disabled Conference disabled Call transfer disabledKey Mapping Mapping Redial and Conf Keys as Speeddials Operational Using Redial Key for Last Number Redial Ring Tones and Tone Sets Ring Tone Settings TableConfiguration Method Valid Values Default Value Phone Features Ring Tone Sets For global configuration only Configuring Ring Tones and Tone SetsSelect Preferences Select Set Ring ToneFor per-line configuration For global configurationAsterisk/Broadworks Server Ring Tone Keywords Priority AlertingHow Priority Alerting Works Call Criteria Bellcore Tones Ring Tone PatternsSylantro Server Ring Tone Keywords Bellcore-dr2 Call criteria Bellcore tones for each call criteriaBellcore-dr3 Bellcore-dr4Call Waiting Tones Configuring Priority Alerting For Sylantro Servers Done Directed Call Pickup BLF or XML Call InterceptionDirected Call Pickup Prefix optional Operational IP Phone Features Enabling/Disabling Directed Call Pickup Configuring BLF/BLF List for Directed Call Pickup Operational IP Phone Features For the 55i, 57i, and 57i CT softkeys Operational IP Phone Features Configuring XML for Directed Call Pickup Operational IP Phone Features For the 55i, 57i, and 57i CT softkeys Operational IP Phone Features Softkeys 55i, 57i, 57i CT State-Based Softkeys 55i, 57i, 57i CT only Softkey Type Default StatesSoftkeyN states Softkey Idle Connected Configuration ExampleSoftkey/Programmable Key/Expansion Module Key Functions Programmable Keys 53iModel 536M Model 560MKey Functions Table Directed Call Distribution ACDPickup DCP Group Call PickupPark SprecodePickup Last Call ReturnTransfer IcomConference Empty Configuration Aastra Web UI Key FunctionServices Configuring Softkeys and Programmable Keys For Softkeys and Expansion Module Keys For programmable keys 57i Cordless CT Feature Keys Feature Key Programming Guidelines List empty Use web page to configureHandset Key Functions Table Handset Feature Key FunctionsFunction File Parameter Description Transfer Feature Key Configuration Aastra Web UIFeature Key Configuration Aastra Web UI Function Configuring Handset Feature Keys Click on Operation-Handset Keys Speeddial Prefixes Busy Lamp Field BLF BLF Setting For use with AsteriskBLF\List Setting BroadSoft BLF Configuration Asterisk BLF ConfigurationConfiguring BLFs Aastra Web UI 41-001160-00, Release 2.1, Rev 119 BLF Subscription Period Configuring BLF Subscription PeriodClick on Advanced Settings-Global SIP-Advanced SIP Settings Automatic Call Distribution ACD for Sylantro Servers Configuring an Automatic Call Distribution ACD Key ACD Auto-Available TimerConfiguring the ACD Auto-Available Timer Type field, select Auto Call Distribution Configuring an ACD Key Using the Aastra Web UIAuto Available check-box, click Enabled 126 41-001160-00, Release 2.1, Rev 127 Using the ACD Feature on your IP Phone 41-001160-00, Release 2.1, Rev 129 Logging In to a Phone Queue 55i, 57i, 57i CT Aastra IP Phone UI41-001160-00, Release 2.1, Rev 131 Logging In To a Phone Queue ACD Subscription Period Configuring ACD Subscription PeriodAastra Web UI Directed Call Pickup/Group Call Pickup for Sylantro Servers Configuration Files 41-001160-00, Release 2.1, Rev 137 Operational IP Phone Features Operational IP Phone Features Using Directed Call Pickup DCP Using Directed Call Pickup/Group Call PickupUsing Group Call Pickup GCP Value field, enter groupcallpickupDCPonline Do Not Disturb DND Configuring DNDOperationalIPPhoneFeatures Bridged Line Appearance BLA 55i, 57i, 57i CT only Line Mode Phone Number BLA Number Configuring BLAGlobal BLA IP Phone Model Possible # of BLA LinesFor Sylantro Server Per-Line BLAConfiguring Global BLA For global configuration of BLA Click on Advanced Settings-Line N For per-line configuration of BLAUsing a BLA Line on the IP Phone #line 1 Bob BLA Support for Third Party RegistrationAlice’s configuration is as follows Park/Pick Up Key Park/Pickup Programmable Configuration using a keyOn 57i/57i CT Model 57i/57i CT Examples Configuring Park/Pickup Key Using Configuration FilesServer Park Configuration Pickup Configuration Model 53i Examples Configuring a Park/Pickup Key Using Aastra Web UI For the 57i/57i CT For the 57i CT Handset 53i Screen 41-001160-00, Release 2.1, Rev 161 Picking up a Parked Call Using the Park Call/Pickup Parked Call FeatureParking a Call 41-001160-00, Release 2.1, Rev 163 Last Call Return lcr For Sylantro Servers Configuring Last Call ReturnOperational IP Phone Features For the 57i CT Handset Click on Operation-Programmable Keys i Screen Call Forwarding IP Phone Model Available Lines for Call Forwarding Enabling/Disabling the Ability to Configure Call ForwardingCall forward disabled Configuring Call Forwarding Configuration Method for Call ForwardingFor global configuration of call forwarding Select Call ForwardFor 55i/57i/57i CT Click on Basic Settings-Call Forward For per-line configuration of call forwarding Callers List Key Callers List41-001160-00, Release 2.1, Rev 175 Enabling/Disabling Callers List Callers list disabledUsing the Callers List 41-001160-00, Release 2.1, Rev 177 Click on Operation-Directory Downloading the Callers ListCreating Customizable Callers List and Services Keys Customizable Callers List and Services KeysMissed calls indicator disabled Missed Calls IndicatorEnabling/Disabling Missed Calls Indicator Accessing and Clearing Missed Calls Directory List Capabilities Directory ListDirectory key Administrator/User Functions for Directory List 184 Enabling/Disabling Directory List Directory disabledCharacter Description Server to IP Phone DownloadDirectory List Limitations Server to IP Phone Download BehaviorDirectory List Limitations To add a new entry to the Directory List Using the Directory ListTo dial from an entry in the Directory List To delete all entries from the Directory List To edit an entry in the Directory ListTo delete an entry from the Directory List From the 57i CT handset Downloading from the IP Phone to the Server Downloading from the Server to the IP PhoneFeaturesPhoneIP Sip lineN vmail Voicemail 55i, 57i, and 57i CT onlySip line1 vmail *97 Sip line2 vmail *95 Using Voicemail 57i57i CT only Creating Customized XML Services on the IP Phones XML Customized ServicesXML Object Description AastraIPPhoneDirectory AastraIPPhoneConfigurationAastraIPPhoneStatus AastraIPPhoneExecuteStatus Scroll Delay seconds Web UI Xml status scroll delay config filesTimeout XML Get TimeoutFor example CancelActionAttribute/Option Description/Usage Valid Values LockIn Enabling/Disabling a Beep for Status Message Displays XML Configuration Push from the Server Scroll Delay Option for Status MessagesStatus Scroll Delay seconds via the Aastra Web UI Xml application URI Xml application title Configuring the Phone to use XMLXML Get Timeout XML Push Requests Example Configuration of XML applicationConfiguring for XML on the IP Phone Aastra Web UI Applicable field For 41-001160-00, Release 2.1, Rev 207 For the 55i/57i/57i CT Using the XML Customized ServiceSelect Custom Features XML Action URIs You dial out the number 5551212, the phone executes a GET on Configuring XML Action URIs Http//10.50.10.140/startup Click on Advanced Settings-Action URIHttp//10.50.10.140/outgoing.php?number=$$REMOTENUMBER$$ XML Softkey URI Configuring XML Softkey URIs Http//10.50.10.140/script.pl?name=$$SIPUSERNAME$$ AastraClick on Operation-Programmable Keys 53i Screen Parameter Description Headset tx gain Audio Transmit and Receive Gain AdjustmentsHeadset sidetone gain Handset tx gainParameter Description Handsfree tx gain Configuring Audio Transmit and Receive Gain AdjustmentsAudio mode Centralized Conferencing for Sylantro and Broadsoft Servers Per-Line Parameter Global ParameterConf@mediaserver address mediaport Configuring Centralized Conferencing Using the Aastra Web UIClick on Advanced Settings-Line #-Basic SIP Network Settings 1 Screen Customizing the Display Columns on the 560M Expansion Module2 Screen Expansion Module 1 3 pagesExpansion Module 2 3 pages Example Expansion Module 3 3 pages3 Screen Cuztomizing the 560M Expansion Module Column DisplayPage Advanced Operational Features IP Phone Administrator Guide About this chapter Feature Description Advanced Operational FeaturesAdvanced Sip send mac Sip send line Configuring the MAC address/Line Number in Register MessageMAC Address/Line Number in Register Messages FeaturesOperational SIP Message Sequence for Blind Transfer Configuring SIP Message Sequence for Blind TransferConfiguring Update Caller ID During a Call Update Caller ID During a CallSip update callerid Force web recovery mode disabled Boot Sequence Recovery ModeMax boot count Configuring Boot Sequence Recovery ModeAuto-discovery Using mDNS Single Call Restriction 57i CT only Configuring Single Call RestrictionFeaturesOperational 3KRQH% Missed Call Summary SubscriptionGlobal Parameters Aastra Web UI Click on Advanced Settings-Line N-Advanced SIP Settings Blacklist Duration Broadsoft Servers Configuring Blacklist Duration Using the Configuration FilesConfiguring a Server Blacklist Using the Aastra Web UI Whitelist Proxy Configuring Whitelist Proxy Using the Configuration FilesConfiguring Whitelist Proxy Using the Aastra Web UI Transport Layer Security TLS SIP Asserted Identity for Sylantro Servers Configuring TLS Using the Configuration Files Advanced Operational Configuring TLS Using the Aastra Web UIClick on Advanced Settings-TLS Support To save your changes Symmetric UDP Signaling Sip user-agent Configuring UserAgent/Server SIP HeadersRemoving UserAgent and Server SIP Headers Mandatory versus Optional Billing Codes Billing Codes Implementation NotesPhonenumber%23billingcode 6172385000#300Phonenumber%23billing code 50500#6172385000Numbers Not Requiring Billing Codes Page Encryption and the IP Phone Encrypted Files on the IP Phone Configuration File Encryption MethodTo encrypt the IP phone configuration files Procedure to Encrypt/Decrypt Configuration Files\ anacrypt aastra.cfg -p 1234abcd \ anacrypt Page Firmware Upgrade Upgrading the Firmware Manual Firmware Update Tftp onlyStep Action Click on Advanced Settings-Firmware Update Manual Firmware and Configuration File Update To restart the phone Auto-resync mode Auto-resync time Automatic Update auto-resyncMode Time Configuring Automatic Update Select the auto-resync mode from the Mode field Reference Page Troubleshooting Log Settings TroubleshootingModule/Debug Level Settings Get local.cfg Get server.cfg Show task and Stack Status Performing Troubleshooting TasksSupport Information To set log settings Step Action Click on Advanced Settings-TroubleshootingTo perform support tasks To set blog modulesLocal.cfg field Get server.cfg fieldWhy does my phone display Application missing? Troubleshooting SolutionsWhy does my phone display Bad Encrypted Config? Why does my phone display the No Service message?Reason FixTroubleshooting How do I restart the IP phone? How do I set the IP phone to factory default? How do I erase the phone’s local configuration? Step Action Click on Operation-User Password How to reset a user’s password?How do I lock and unlock the phone? Click on Operation-Phone Lock Page Appendix a IP Phone Administrator Guide About this appendix Appendix Setting Parameters in Configuration Files Simplified IP Phone UI Options Menu Parameter Configuration FilesParameter IP phone UI Subnet mask Default Value Range Range Example Password SettingsConfiguration Files Aastra.cfg, mac.cfg Parameter user passwordEmergency Dial Plan Settings Aastra Web UI Settings Download protocol Parameter alternate tftp server Description Format Default Value Range Example IP phone UIDefault Value Range Example Ftp server Ftp password Https server Description Format Default Value Range Example Aastra Web UI Parameter auto resync modeParameter Aastra Web UI Network Address Translation NAT Settings Sip nat rtp port Sip nortel nat timer Https Client and Server Settings Https block http post xml UPnP Settings Upnp manager and upnp gateway must be set Virtual Local Area Network Vlan SettingsGlobal Parameters LAN Port Ethernet Port 0 Parameters Dscp Priority Parameter tos priority mapPC Port Ethernet Port 1 Parameters Type of Service ToS/DSCP Settings Time Server Settings Parameter time server2 Time and Date Settings Parameter dst config Time Zone Name Time Zone Code Time Zone Name/Time Zone Code TableNST HKS PES SIP Local Dial Plan Settings Sip dial plan terminator SIP Global Authentication Settings SIP Basic, Global SettingsParameter sip user name Sip auth name Sip bla number SIP Global Network Settings Sip backup proxy ip Sip outbound proxy port Sip registrar port Sip backup registrar port SIP Per-Line Authentication Settings SIP Basic, Per-Line SettingsSip lineN user name Sip lineN auth name Sip lineN bla number Asip lineN mode SIP Per-Line Network Settings Sip linex backup proxy ip Sip lineN outbound proxy port Sip lineN registrar port Sip linex backup registrar port Global Settings Centralized Conferencing SettingsPer-Line Settings Period Advanced SIP SettingsSip send mac Description Format Default Value Range Example Parameter sip session timerSip T2 timer Sip transport protocol Transport Protocol Sip registration retry timer Sip registration renewal timer Sip acd subscription period Missed Call Summary Subscription Settings Missed call summary subscription parameter, phone B receives Per-Line ParameterTransport Layer Security TLS Settings Sips persistent tls Sips root and intermediate Sips local certificate Sips trusted certificates RTP, Codec, Dtmf Global Settings Silsupp PayloadSip dtmf method Sip silence suppression Sip lineN srtp mode Format Default Value Range Examples Default Value Range Examples Voicemail Settings Directory Settings Customize Callers List and Services Key Callers List SettingsCall Forward Settings Missed Calls Indicator Settings XML Settings Xml application title Xml beep notification Action URI Settings Action uri incoming Ring Tone and Tone Set Global Settings Range Aastra Web UI & IP Phone UI Parameter tone set Ring Tone Per-Line Settings Incoming Call Interrupts Dialing Setting For For the 55i, 57i, and 57i CTStuttered Dial Tone Setting Call Waiting Settings Message Waiting Indicator Settings For Sylantro Server only Priority Alert SettingsParameter alert community Alert community Parameter alert external Alert group Parameter alert priority Configuration File Language SettingsLangfrca.txt Langesmx.txt Langde.txt Langit.txt Language Pack SettingsCountry Codes from Standard ISO Language Codes from Standard ISOLanguage Language Code Country Country CodeBahamas Appendix Iceland 41-001160-00, Release 2.1, Rev 115 Pakistan Appendix a Uganda Suppress Dtmf Playback Setting Display Dtmf Digits Setting Outgoing Intercom Settings Intercom, Auto-Answer, and Barge In SettingsDefault Value For Aastra Web UI For Configuration FilesSip intercom prefix code Incoming Intercom Settings Sip play warning tone Audio Transmit and Receive Gain Adjustment Settings Handset sidetone gain Handsfree tx gain Directed Call Pickup BLF or XML Call Interception Settings Directed call pickup prefix Parameter play a ring splash ACD Auto-Available Timer Settings Server Pickup Values Asterisk Sylantro BroadWorks Park and Pickup Global Settings 57i/57i CT onlyServer Park Values Asterisk Sylantro BroadWorks Mapping Key Parameters Call transfer disabled Map conf key to Model 560M Functions on Bottom keys Expansion Module Programmable Lines HandsetSoftkey Settings for 55i, 57i, 57i CT Format Default Value Group Call Pickup on groupA Directed Call Pickup on ExtensionParameter softkeyN label SoftkeyN value Parameter softkeyN line Lcr, Directory, Callers List, Icom, Services, empty Default Value For softkey type NoneFor softkey type Flash For softkey type Sprecode, ParkOutgoing IncomingProgrammable Key Settings for 53i Text Not Applicable 146 List BLF/List in the Aastra Web UI Parameter prgkeyN value PrgkeyN line Top Softkey Settings for 57i and 57i CT Automatically activates a service provided by the server Example TopsoftkeyN label Parameter topsoftkeyN value TopsoftkeyN line Handset Feature Key Settings for the 57i CT FeaturekeyN label ExpmodX keyN type Used as the Services key Parameter expmodX keyN label ExpmodX keyN value Format Default Value Range Example Aastra Web UI Locking Softkeys and Programmable Keys Appendix a ExpmodX key N locked Expansion Module Customizing 560M Expansion Module Column DisplayExpanmod1page2right Expanmod2page1left Expanmod2page2right Expanmod3page1left Expanmod3page2right Advanced Operational Parameters Blind Transfer SettingAppendix Update Caller ID SettingSingle Call Restriction Blacklist Duration User-Agent Setting Symmetric UDP Signaling SettingLog Settings Troubleshooting ParametersParameters Aastra Web UI Module Name configuration filesAppendix B Tftp Server Set-up Configuration Server Protocol SetupConfiguration Server Protocol Setup Page Appendix C IP Phone at the Asterisk IP PBX Phone1/phone1192.168.1.1D 255.255.255.255 5060 Unmonitored Exten 1234,1,DialSIP/phone1,20Name/username Host Mask Port Page Appendix D 57i Sample Configuration File Sample Configuration FilesSample Configuration Files # Time Server Settings ## ===================== # Configuration Server Settings ## = = = = = = = = = = = = = = = Previous expression # General SIP Settings # = = = = = = = = = = = # Per-line SIP Settings # ====================== Sip line3 vmail *78 # Speed Dials # Phone Model 57iCT 57i CT Sample Configuration File# Dhcp Setting # ============ # Network Settings # ================ # Time Server Settings # ==================== # ============================= Appendix Previous expression # General SIP Settings # ==================== # Per-line SIP Settings # ===================== # Softkey Settings # ================ # Speed Dials # DND Key softkey4 type dnd softkey4 label DND #Takes an Appendix D Appendix D Appendix D Appendix D 53i Sample Configuration File # Dhcp Setting # ============= # Time Server Settings # ===================== Appendix D # Additional Network Settings # ============================ Appendix D Appendix Appendix D Previous expression # General SIP Settings # ====================== # Per-line SIP Settings # ======================= # Programmable Key Settings # =========================== Prgkey Value Page Appendix E Asterisk BLF 57i and 57i CT Configuration Parameters for Asterisk BLF53i Configuration Parameters for Asterisk BLF BroadSoft BroadWorks BLF 53i Configuration Parameters for Broadsoft BroadWorks BLFPage Appendix F Multiple Proxy Server Configuration Multiple Proxy Server Configuration Page Appendix G G-40 G-62 G-65 XML format OverviewSupport of Virtual Web Servers Character Description Escape SequenceCreating XML Objects Existing Action Text Menu Input Keys Creating Custom SoftkeysImplementation Text Menu Object Menu ScreensXML Screen Example You use this attribute as follows Turning Off Automatic Numbering of Menu ItemsAppendix G AastraIPPhoneTextMenu style=bullet Using Bullets in Menu ItemsAppendix G Text Screen Object Text Screens XML Example Test Implementation 55i, 57i, 57i CT XML Support for Answer and Ignore SoftkeysFor 55i, 57i, and 57i CT OHN 3MITH Text Screen Format Object for Text Screens AastraIPPhoneFormattedTextScreen Structure Line of static text Line of static text Implementation IP Addresss UserInput Object User Input ScreensXML Description Proxy Server Server IP Backspace Dot Cancel Done Implementation Number Proxy Port Backspace Cancel DoneImplementation String Symbol XML Encoding XML Softkey Example TimeUS TimeInt US Date Int Date Time and Date Formats User Input ScreensUS Time Enter Current Time 120000am Cancel Done US Date Enter Birthday 12/22/1980 Cancel Done Selection......./Selection Multiple Input Fields User Input ScreensOr condensed New AastraIPPhoneInputScreen Attributes DefaultIndexDisplayMode Screen Scolling down changes to the next input field Condensed Mode Screen Directory Object Directory List Screen 57i only XML Example AastraIPPhoneStatus Structure Status Message Object Idle ScreenXML Examples AastraIPPhoneExecute Object Structure Execute Commands Object for executing XML commandsUsing the NoOp Command Using the Reset CommandLED Behavior XML Attribute Using the FastReboot CommandXML Softkey or Programmable Key LED Behavior Command Appendix G AastraIPPhoneConfiguration Object Structure XML Example Dynamic Configuration Parameters Dynamic Configuration ParametersAppendix G XML Image Objects 55i, 57i/57i CT only Press#1Stock-WeatherMarketVerticalAlign HorizontalAlign Height Width AastraIPPhoneImageScreen ObjectImage AastraIPPhoneImageMenu AastraIPPhoneImageMenu#Weather AastraIPPhoneTextMenu Icon Menu Done Using the IconListSoftKey index = 4 icon=2 URI Name Displays this IP Phone Internal Icon ImagesAppendix Attributes/Options to Use with XML Objects Timeout Attribute Configurable via XML objects only LockIn Attribute Configurable via XML objects only CancelAction Attribute configurable via XML objects only Post / HTTP/1.1 Http PostAppendix G Http Refresh Header Refresh Setting FormatHttp Language Header XML Schema FileXML Schema Appendix G Appendix G Appendix G Exclusions Limited WarrantyAfter Warranty Service Warranty Repair ServicesIndex Index-2 41-001160-00, Release 2.1, Rev Index-3 Index-4 41-001160-00, Release 2.1, Rev Index-5 Index-6 41-001160-00, Release 2.1, Rev Index-7 Index-8 Page SIP IP Phone Administrator Guide

Related manuals

Manual 44 pages 50.54 Kb

Manual 2 pages 42.47 Kb

Manual 2 pages 5.69 Kb