Aastra Telecom 57I CT, 55I, 53I manual You dial out the number 5551212, the phone executes a GET on

IP Phone Administrator Guide Operational Features

Operational IP Phone Features

The following table identifies the configurable action URI parameters in the configuration files and the Aastra Web UI. This table also identifies the variables that apply to specific parameters.

Configuration File	Aastra Web UI Parameters at	Applicable Variables
Parameters	Advanced Settings->Action URI
action uri startup	Startup	-
action uri registered	Successful Registration	$$SIPUSERNAME$$
		$$SIPAUTHNAME$$
		$$PROXYURL$$
action uri incoming	Incoming Call	$$REMOTENUMBER$$
		$$DISPLAYNAME$$
		$$SIPUSERNAME$$
		$$INCOMINGNAME$$
action uri outgoing	Outgoing Call	$$REMOTENUMBER$$
		$$SIPUSERNAME$$
action uri offhook	Offhook	-
action uri onhook	Onhook	-

How it works

When a startup, successful registration, incoming call, outgoing call, offhook, or onhook call event occurs on the phone, the phone checks to see if the event has an action URI configured. If the phones finds a URI configured, any variables configured (in the form $$VARIABLENAME$$) are replaced with the value of the appropriate variable. After all of the variables are bound, the phone executes a GET on the URI. The Action URI binds all variables and is not dependant on the state of the phone.

For example, if you enter the following string for the action uri outgoing parameter:

action uri outgoing: http://10.50.10.140/ outgoing.pl?number=$$REMOTENUMBER$$

and you dial out the number 5551212, the phone executes a GET on:

5-210 41-001160-00, Release 2.1, Rev 04