Cisco Systems 7915 warranty Connect the Footstand, Connect a Laptop Cable Lock optional

Page 14

Connect the Footstand

Step 1 Locate the three hooks on the footstand.

Step 2 Position the hooks so that they align with the open slots on the support bar.

Note There are four positions in each of the three sets of open slots on the support bar. This lets you choose the angle of the footstand.

Step 3 Insert the footstand hooks into the support bar and push in slightly to make the connection.

Connect a Laptop Cable Lock (optional)

Note Supported only on phones that have a security slot on the back of the phone. Contact your system administrator for more information.

Refer to Figure 7 and the steps that follow.

14

Image 14
Contents Cisco Unified IP Phone Expansion Module Introducing the Cisco Unified IP Phone Expansion Module Footstand Kits Package ContentsBefore You Begin Safety Information Additional EquipmentInstalling and Using Your Expansion Module Installing the Cisco Unified IP Phone Expansion Module Remove the Footstand from the Cisco Unified IP Phone Removing the Footstand Connect the Support Bar to the Cisco Unified IP Phone Connect the Expansion Module 7915 to the Support BarConnecting the Expansion Module to the Support Bar Connect the Interface Cable Out Icons on the AUX JacksConnect the Power Supply Unit Connecting the Power Supply UnitPage Connect the Footstand Connect a Laptop Cable Lock optionalConnecting a Laptop Cable Lock Start Up SequenceFeatures of the Cisco Unified IP Phone Expansion Module Using the Cisco Unified IP Phone Expansion Module Keeping Your Call Information Private Adjusting the Contrast Troubleshooting the Cisco Unified IP Phone Expansion ModuleProblem Solution Physical and Operating Environment Specifications Cable SpecificationsWhere to Find More Information Related DocumentationCisco One-Year Limited Hardware Warranty Terms Duration of Hardware Warranty Page Cisco Systems, Inc