Cisco Systems 7915 warranty Start Up Sequence, Connecting a Laptop Cable Lock

Page 15

Figure 7 Connecting a Laptop Cable Lock

140967

Step 1 Detach the cable lock door from the support bar.

Step 2 Secure the security cable to a desktop.

Step 3 Insert the laptop cable lock into the security slot on the back of the phone, lock it, and remove the key.

Start Up Sequence

After the Cisco Unified IP Phone Expansion Module 7915 is installed, upon startup the buttons all show a steady amber light. The Cisco logo, load name, segment name, and download percentage are displayed. After the firmware is installed, the LCD screen refreshes and the buttons all go off and any line appearances are displayed in the LCD screen. You can then start using the Expansion Module.

15

Image 15

Contents Cisco Unified IP Phone Expansion Module Introducing the Cisco Unified IP Phone Expansion Module Package Contents Before You BeginFootstand Kits Additional Equipment Safety InformationInstalling and Using Your Expansion Module Installing the Cisco Unified IP Phone Expansion Module Remove the Footstand from the Cisco Unified IP Phone Removing the Footstand Connect the Expansion Module 7915 to the Support Bar Connect the Support Bar to the Cisco Unified IP PhoneConnecting the Expansion Module to the Support Bar Out Icons on the AUX Jacks Connect the Interface Cable Connecting the Power Supply Unit Connect the Power Supply UnitPage Connect a Laptop Cable Lock optional Connect the FootstandStart Up Sequence Connecting a Laptop Cable LockFeatures of the Cisco Unified IP Phone Expansion Module Using the Cisco Unified IP Phone Expansion Module Keeping Your Call Information Private Troubleshooting the Cisco Unified IP Phone Expansion Module Adjusting the ContrastProblem Solution Cable Specifications Physical and Operating Environment SpecificationsRelated Documentation Where to Find More InformationCisco One-Year Limited Hardware Warranty Terms Duration of Hardware Warranty Page Cisco Systems, Inc