Cisco Systems 7915 warranty Connect the Support Bar to the Cisco Unified IP Phone

Page 9

Connect the Support Bar to the Cisco Unified IP Phone

Refer to Figure 3 and the steps that follow.

Figure 3 Connecting the Support Bar

	140969


Step 1	Position the support bar on the back of the
	Cisco Unified IP Phone so that it fits flush with the
	phone.
Step 2	Locate the two connector pins.
Step 3	Use a flat head screwdriver to carefully push each of the
	connector pins so that the support bar is firmly fastened
	to the Cisco Unified IP Phone.

Connect the Expansion Module 7915 to the Support Bar

Refer to Figure 4 and the steps that follow.

9

Image 9

Contents Cisco Unified IP Phone Expansion Module Introducing the Cisco Unified IP Phone Expansion Module Package Contents Before You BeginFootstand Kits Additional Equipment Safety InformationInstalling and Using Your Expansion Module Installing the Cisco Unified IP Phone Expansion Module Remove the Footstand from the Cisco Unified IP Phone Removing the Footstand Connect the Expansion Module 7915 to the Support Bar Connect the Support Bar to the Cisco Unified IP PhoneConnecting the Expansion Module to the Support Bar Out Icons on the AUX Jacks Connect the Interface CableConnecting the Power Supply Unit Connect the Power Supply UnitPage Connect a Laptop Cable Lock optional Connect the FootstandStart Up Sequence Connecting a Laptop Cable LockFeatures of the Cisco Unified IP Phone Expansion Module Using the Cisco Unified IP Phone Expansion Module Keeping Your Call Information Private Troubleshooting the Cisco Unified IP Phone Expansion Module Adjusting the ContrastProblem Solution Cable Specifications Physical and Operating Environment SpecificationsRelated Documentation Where to Find More InformationCisco One-Year Limited Hardware Warranty Terms Duration of Hardware Warranty Page Cisco Systems, Inc