Cisco Systems 7915 warranty Removing the Footstand

Page 8

Figure 2 Removing the Footstand

63147

Step 1 Unplug the Cisco Unified IP Phone network and power connections.

Step 2 Unplug the handset, and unplug the headset if one is attached to the phone.

Step 3 Turn the Cisco Unified IP Phone over and lay it on a protected flat surface to prevent it from being scratched.

Step 4 Locate the two foot pins on the footstand.

Step 5 Use a flat head screwdriver to carefully push on one of the foot pins to release it. Then carefully push on the other foot pin to release it.

Note You may have to lift and hold the

Cisco Unified IP Phone to support it when pushing the foot pins. When pushing on the footpins, push away from your body.

Step 6 Lift off the footstand and store it separately.

8

Image 8

Contents Cisco Unified IP Phone Expansion Module Introducing the Cisco Unified IP Phone Expansion Module Footstand Kits Package ContentsBefore You Begin Safety Information Additional EquipmentInstalling and Using Your Expansion Module Installing the Cisco Unified IP Phone Expansion Module Remove the Footstand from the Cisco Unified IP Phone Removing the Footstand Connect the Support Bar to the Cisco Unified IP Phone Connect the Expansion Module 7915 to the Support BarConnecting the Expansion Module to the Support Bar Connect the Interface Cable Out Icons on the AUX JacksConnect the Power Supply Unit Connecting the Power Supply UnitPage Connect the Footstand Connect a Laptop Cable Lock optionalConnecting a Laptop Cable Lock Start Up SequenceFeatures of the Cisco Unified IP Phone Expansion Module Using the Cisco Unified IP Phone Expansion Module Keeping Your Call Information Private Adjusting the Contrast Troubleshooting the Cisco Unified IP Phone Expansion ModuleProblem Solution Physical and Operating Environment Specifications Cable SpecificationsWhere to Find More Information Related DocumentationCisco One-Year Limited Hardware Warranty Terms Duration of Hardware Warranty Page Cisco Systems, Inc