Appendix
Replacing a handset
You may need to de-register your handsets if:
You have the maximum number of registered handsets (four) and need to replace a handset.
You wish to change the designated handset number of your registered handsets.
You must first
Please read carefully through all the instructions on this page before beginning the
To
1.Press and hold HANDSET LOCATOR on the telephone base for about 10
seconds (until the IN USE light turns on and starts to flash), then release the HANDSET LOCATOR button.
2.Immediately press and release HANDSET LOCATOR again. You must press HANDSET LOCATOR while the IN USE light is still flashing. (The light flashes for about seven seconds. If the light stops flashing, pick up the handset and place it back into the telephone base, then repeat step one above.)
3.The handset(s) will show CONNECTING... and it will take about 10 seconds to complete
NOT REGISTERED
4.To
44