AT&T SPIRIT Attendant owner manual Input rating

NOTE: Use only a UL Listed wall plug-in power transformer that has Class 2 outputs and the following characteristics:

Input rating:	99-127 V AC rms 60 llz
	150 mA maximum
0utput rating:	27-35 V DC at 200 mA
	14-18 V DC at 200 mA

The power transformer supplied with the ConntecT/R has these characteristics.

Step 3 — Test the equipment.

After the SPIRIT Attendant ConnecT/R is Installed, test the SPIRIT Attendant by placing a call to be answered by the SPIRIT Attendant.

If you have any problems, see the Troubleshoot- ing section of this manual for more information.

NOTE: If the caller requests the SPIRIT Attendant to transfer a call to an extension number that is between the valid pro- gramed lowest and highest extension but there is no station set plugged into that station port, the caller will be placed on hold and the SPIRIT Attendant will not bc able to retrieve the call. To help prevent this from occuring, careful attention should be given to setting the lowest/ highest extension numbers and try to avoid skipping over extension numbers while assigning them.

7