4
Step 1 — Mount the SPIRIT Attendant
ConnecT/R (optional).
The SPIRIT Attendant ConnecT/R is designed to be placed on your desk or mounted on any vertical surface. Do not place it on the floor. Hardware has been included to mount the SPIRIT Attendant ConnecT/R on the wall: two plastic
1.Select an appropriate location. The SPIRIT Attendant ConnecT/R can be no more than six feet from its power supply (an AC outlet that isn’t controlled by a wall switch) and no more than six feet from the devices attached to it. The bottom of the SPIRIT Attendant ConnecT/R should be at least two feet from the floor.
2.Position the SPIRIT Attendant ConnecT/R so the side with the jacks and settings is down or to the side, but not up.
3.Remove the backing from the plastic tabs.
4.Gently position a tab by aligning the end of the adhesive with the outside edge of the SPIRIT Attendant ConnecT/R and the side
of the tab against the inside of one of the feet. Repeat for the second tab.
5.Press the tabs firmly into position.
6.With the tabs at the top, hold the SPIRIT Attendant ConnecT/R against the wall where you plan to mount it and use a pencil to mark the location of the holes in the tabs. The bottom of the SPIRIT Attendant ConnecT/R should be at least two feet from the floor.
7.If you have plywood walls or walls with a sturdy supporting structure (either wood