AT&T 1412 user manual If you lose a call after changing channels, If your telephone, Misdials

Page 57

1412 2002.12.7 9:21 AM Page 54

PHONE

PROBLEM

If you lose a call after changing channels:

SOLUTION

You were probably almost out of range. Move closer to the base before changing channels. Before placing another call, set the handset in the base for at least 15 seconds.

PROBLEM

If the phone does not ring when you receive a call:

SOLUTION

•Make sure the ringers are on. (See “Set Line 1 Ringer”and “Set Line 2 Ringer”in the FEATURE SETUP section of this manual.

•Make sure the telephone line cord is connected firmly to the base and the telephone jack.

•Make sure the AC adapter is plugged firmly into an electrical outlet not controlled by a wall switch.

•You might be too far from the base;move closer.

•You might have too many extension phones on your telephone line to allow all of them to ring. Try unplugging some of them.

PROBLEM	SOLUTION
If your telephone	• If you have dial pulse (rotary) service,
misdials:	you’ll need to set the dial method to
	. Follow the instructions under
	“Set Dial Mode”in the FEATURE SETUP
	section of this manual.
	• If you have touch tone service and you
	hear clicks while you are dialing, you’ll
	need to set the dial method to	.
	Follow the instructions under “Set Dial
	Mode”in the FEATURE SETUP section of
	this manual.

54

Image 57

Contents Part 1 Important Product Information Caller ID/Call Waiting on Handset1412 2002.12.7 920 AM Contents Before YOU Begin Parts ListAbout Call History About Caller Identification Caller IDInstallation Before You InstallInstall the handset battery Table/Desk Installation Connect the power cordConnect the telephone line cords Charge the handset battery Check for dial toneTurn base ringers on or off Wall Installation Mount base on wall Follow Steps 3 5 in Table/Desk InstallationHeadset Belt ClipData Port Feature Setup Menu Feature SetupSet Line 1 Ringer Set Line 2 Ringer Set Voice Messages Indicators Set Time Set Date Set Dial Mode Telephone Operation Idle ScreenMake a Call Answer a Call Volume Erase a Number from Handset Redial Memory RedialFlash/Call Waiting To return to two-way conversation MuteTemporary Tone Dialing Handset Locator Display Screen Messages Handset only Handset Lights At the Handset Intercom OperationMake an Intercom Call While on a Phone Call At the BaseThree-Way Conference Call Conference CallsEnd a Conference Call Four-Way Conference CallSpeak Privately with One Party Place a Conference Call on HoldSwitch from Handset to Base Switch a Conference Call Between Handset and BaseStore a Number and Name in the Directory Directory1412 2002.12.7 920 AM Store a Number from Handset Redial in the Directory 1412 2002.12.7 920 AM Keypad Characters Dial a Number in the Directory Edit a Number/Name in the Directory Delete a Directory Entry Turn Distinctive Ring On/Off Store a Number in Base Memory Base MemoryDial a Base Memory Number Caller ID Operation Review Call History Remove a Call Record Store a Call Record in the Directory Display Dial For example The number is 908 555 Dialing OptionsBattery Life Charge the Handset Battery PackBatteries Replace the Handset Battery Pack If you hear a long tone when you try to use the handset Case of DifficultyIf the phone does not work at all, check these items first If you hear other calls while using your phone If you hear noise or interference when using the phoneIf you lose a call after changing channels If the phone does not ring when you receive a callIf your telephone MisdialsIf the caller’s name or phone number is not displayed Caller IDDefault Settings Default SettingsTechnical Specifications Index OLD