AT&T 1412 user manual Charge the handset battery, Check for dial tone, Turn base ringers on or off

Page 8

1412 2002.12.7 9:20 AM Page 5

If you have two separate jacks, use both long line cords. Connect a line cord from the wall jack you wish to designate as your Line 1 to the jack labeled L1/L1+L2 on the back of the base. Connect the other line cord from the remaining wall jack to the jack labeled L2 on the back of the base. Make sure the plugs snap firmly into place.

Standard electrical outlet

Power

Cord

Line 2 Modular telephone jack

L1/L1+L2 Jack

L2 Jack

Line 1

Modular

telephone

jack

3Charge the handset battery.

Place the handset in the base. Charge the battery overnight the first time. After the first charge,the battery typically charges in eight hours.

4Check for dial tone.

After the batteries are charged,pick up the handset,press

and listen for a dial tone. Then press . If you don’t hear a dial tone,see IN CASE OF DIFFICULTY starting on page 52.

5Turn base ringers on or off.

Use the L1 RINGER and L2 RINGER switches on the right side of the base to set the base ringer volume to OFF, LOW or HIGH for each line.

5

Image 8
Contents Caller ID/Call Waiting on Handset Part 1 Important Product Information1412 2002.12.7 920 AM Contents Parts List Before YOU BeginAbout Caller Identification Caller ID About Call HistoryInstall the handset battery InstallationBefore You Install Connect the telephone line cords Table/Desk InstallationConnect the power cord Turn base ringers on or off Charge the handset batteryCheck for dial tone Wall Installation Follow Steps 3 5 in Table/Desk Installation Mount base on wallBelt Clip HeadsetData Port Feature Setup Feature Setup MenuSet Line 1 Ringer Set Line 2 Ringer Set Voice Messages Indicators Set Time Set Date Set Dial Mode Make a Call Telephone OperationIdle Screen Answer a Call Volume Redial Erase a Number from Handset Redial MemoryFlash/Call Waiting Mute To return to two-way conversationTemporary Tone Dialing Handset Locator Display Screen Messages Handset only Handset Lights Intercom Operation At the HandsetAt the Base Make an Intercom Call While on a Phone CallConference Calls Three-Way Conference CallFour-Way Conference Call End a Conference CallPlace a Conference Call on Hold Speak Privately with One PartySwitch a Conference Call Between Handset and Base Switch from Handset to BaseDirectory Store a Number and Name in the Directory1412 2002.12.7 920 AM Store a Number from Handset Redial in the Directory 1412 2002.12.7 920 AM Keypad Characters Dial a Number in the Directory Edit a Number/Name in the Directory Delete a Directory Entry Turn Distinctive Ring On/Off Base Memory Store a Number in Base MemoryDial a Base Memory Number Caller ID Operation Review Call History Remove a Call Record Store a Call Record in the Directory Display Dial Dialing Options For example The number is 908 555Batteries Battery LifeCharge the Handset Battery Pack Replace the Handset Battery Pack If the phone does not work at all, check these items first If you hear a long tone when you try to use the handsetCase of Difficulty If you hear noise or interference when using the phone If you hear other calls while using your phoneIf the phone does not ring when you receive a call If you lose a call after changing channelsIf your telephone MisdialsCaller ID If the caller’s name or phone number is not displayedDefault Settings Default SettingsTechnical Specifications Index OLD