AT&T 9230 user manual Operating Range, Display Screen Messages

Page 12

TELEPHONE OPERATION

Operating Range

This cordless telephone operates within the maximum power allowed by the Federal Communications Commission (FCC). Even so, this handset and base can communicate over only a certain distance — which can vary with the locations of the base and handset, the weather, and the construction of your home or office. For best performance, keep the base antenna fully upright.

If you receive a call while you are out of range, the handset might not ring — or if it does ring, the call might not connect when you press P. Move closer to the base, then press P to answer the call.

If you move out of range during a phone conversation, you might hear noise or interference. To improve reception, move closer to the base.

If you move out of range without pressing O, your phone will be left “off the hook.” To hang up properly, walk back into range, periodically pressing O.

Display Screen Messages

Screen Displays:

When:

STANDBY

The handset is not in use.

NO LINE

The base is not connected to the telephone line,

 

or the line is not working.

RINGING

There is a call coming in.

CONNECTING

The handset is waiting for a dial tone.

PHONE ON

The handset is in use.

MESSAGE WAITING

You have received telephone company voice mail.

PAGING

The base is paging the handset.

11

Page 11 Page 13
Image 12
Page 11 Page 13
Contents MHz Cordless Telephone With Caller ID/Call Waiting Advanced American Telephones. All rights reserved Contents Before YOU Begin About Caller Identification Caller IDInstallation Before You InstallTable/Desk Installation Check for dial toneWall Installation Feature Settings Time/DateRinger Selection Auto Answer On/Off Telephone Operation Handset Locator Headset Jack Operating Range Display Screen MessagesTelephone Memory Store Memory NumbersEdit Numbers Stored in Memory Delete Numbers Stored in MemoryMove Numbers Stored in Memory Delete a Specific NumberDial Memory Numbers Caller ID Operation About Call History Review Call HistoryDelete Call History Dial a Displayed NumberDelete a Specific Call Delete All CallsStore Call in Memory To LOCATION?Call Block Turn Off Call BlockPrivate Name Charging the Handset Battery Pack BatteriesReplacing the Handset Battery Pack If the phone does not ring when you receive a call Case of DifficultyIf the phone doesn’t work at all, check these items first If you hear noise or interference when using the phone If you hear other calls while using your phoneIf you lose a call after changing channels
Top Page Image Contents