AT&T 9230 user manual Wall Installation

Page 7

INSTALLATION

Wall Installation

1Connect the telephone line cord .

2Connect the power cord.

3Mount the base on the wall.

Standard electrical outlet

b)Place power cord as shown, so it hangs straight down between base and wall.

a)Align holes on base with mounting studs on wall jack.

Modular telephone jack

c)Pull base down

on mounting studs until it locks into place.

4 Follow Steps 3–5 in Table/Desk Installation.

6

Image 7

Contents MHz Cordless Telephone With Caller ID/Call Waiting Advanced American Telephones. All rights reserved Contents About Caller Identification Caller ID Before YOU BeginBefore You Install InstallationCheck for dial tone Table/Desk InstallationWall Installation Auto Answer On/Off Feature SettingsTime/Date Ringer SelectionTelephone Operation Handset Locator Headset Jack Display Screen Messages Operating RangeStore Memory Numbers Telephone MemoryDelete a Specific Number Edit Numbers Stored in MemoryDelete Numbers Stored in Memory Move Numbers Stored in MemoryDial Memory Numbers Caller ID Operation Review Call History About Call HistoryDelete All Calls Delete Call HistoryDial a Displayed Number Delete a Specific CallTo LOCATION? Store Call in MemoryTurn Off Call Block Call BlockPrivate Name Batteries Charging the Handset Battery PackReplacing the Handset Battery Pack Case of Difficulty If the phone does not ring when you receive a callIf the phone doesn’t work at all, check these items first If you hear other calls while using your phone If you hear noise or interference when using the phoneIf you lose a call after changing channels