AT&T 9230 user manual Replacing the Handset Battery Pack

Page 23

BATTERIES

Replacing the Handset Battery Pack

1Remove the battery compartment cover on the handset by pressing on the indentation and sliding the cover downward.

2Lift out the old battery pack and disconnect.

3Plug battery pack connector into handset. Place the battery pack and wires in the compartment.

4Replace the cover by sliding it up into place.

5The new battery pack must be charged before using the phone. Place the handset in the base and allow it to charge for at least

24 hours for the first charge. The telephone might operate before that, but for best performance, let the battery pack charge fully.

22

Image 23

Contents MHz Cordless Telephone With Caller ID/Call Waiting Advanced American Telephones. All rights reserved Contents About Caller Identification Caller ID Before YOU BeginBefore You Install InstallationCheck for dial tone Table/Desk InstallationWall Installation Auto Answer On/Off Feature SettingsTime/Date Ringer SelectionTelephone Operation Handset Locator Headset Jack Display Screen Messages Operating RangeStore Memory Numbers Telephone MemoryDelete a Specific Number Edit Numbers Stored in MemoryDelete Numbers Stored in Memory Move Numbers Stored in MemoryDial Memory Numbers Caller ID Operation Review Call History About Call HistoryDelete All Calls Delete Call HistoryDial a Displayed Number Delete a Specific CallTo LOCATION? Store Call in Memory Turn Off Call Block Call BlockPrivate Name Batteries Charging the Handset Battery PackReplacing the Handset Battery Pack If the phone doesn’t work at all, check these items first If the phone does not ring when you receive a callCase of Difficulty If you lose a call after changing channels If you hear noise or interference when using the phoneIf you hear other calls while using your phone