9345_book_1ATT 6/5/01 11:34 AM Page 11
TELEPHONE MEMORY
4When you finish entering the name, press s. The screen displays ENTER NUMBER.
5Enter the telephone number. Use < to backspace and make a correction. Press r to store a pause in the dialing sequence.
6Press s to store your entry. The screen displays SAVING… and you’ll hear a series of beeps confirming the entry.
Note: When memory is full the screen displays MEMORY FULL, an error tone sounds, and you will not be able to store a new number until you delete a stored number.
Edit Numbers Stored in Memory
1Press > (DIR). The screen displays DIRECTORY.
2Press < or > to scroll alphabetically through numbers stored in memory
Press the dial pad key for the first letter of the entry you want to edit.
3When the screen displays the number you want to edit, press s. Then press < or > until EDIT flashes.
DIAL EDIT ERASE
5/01 5:40PM OLD28
4Press s. The screen displays the name and number. The flashing cursor appears at the end of the name. Use <, > and the dial pad keys to edit the name. Press s to move on to edit the number.
5Press s to save the edited information. You’ll hear a series of beeps confirming the change.
11