AT&T 9345 user manual Installation, Before You Install

Page 5

9345_book_1ATT 6/5/01 11:33 AM Page 2

INSTALLATION

Before You Install

1Choose a location for the base near an electrical outlet and a telephone jack.

This phone requires a modular telephone jack and a standard electrical outlet (110v AC) not controlled by a wall switch.

2Install the handset battery.

a)Remove battery compartment cover by pressing on the

indentation and sliding downward.

b) Align two holes in plug with socket pins, and snap the plug into place.

c)Place battery pack in compartment with the wires in the lower left

corner, along the bottom of the battery pack.

d) Replace cover by sliding it up into place.

2

Image 5

Contents MHz Cordless Telephone with Caller ID/Call Waiting Advanced American Telephones. All rights reserved Contents About Caller Identification Caller ID Before YOU BeginBefore You Install InstallationTable/Desk Installation Charge the handset battery Wall Installation Telephone Operation Page/Handset Locator Headset Jack Handset Ringer Style/Battery SaveTemporary Tone Dialing Display Screen Messages Operating RangeStore Memory Numbers Telephone MemoryDial Edit Erase Edit Numbers Stored in MemoryDial Memory Numbers Delete Numbers Stored in MemoryReview Call History Caller ID OperationAbout Call History Dial a Displayed Number Delete Records from Call HistoryDelete a Specific Call Delete All CallsOVERWRITE? no Store a Call History Record in MemoryPrivate Name Batteries Charging the Handset Battery PackReplacing the Handset Battery Pack If the phone doesn’t work at all, check these items first If the phone does not ring when you receive a callCase of Difficulty If you lose a call after changing channels If you hear noise or interference when using the phoneIf you hear other calls while using your phone