AT&T 9345 user manual Charge the handset battery

Page 7

9345_book_1ATT 6/5/01 11:33 AM Page 4

INSTALLATION

3Charge the handset battery.

Place the handset in the base. Charge the battery for at least 16 hours the first time.

4Check for dial tone.

After the batteries are charged, pick up the handset and press P; you should hear a dial tone.

5Set the dial mode.

If you have touch tone service, the phone is ready to use as soon as the batteries are charged.

If you have dial pulse (rotary) service, you’ll need to change the dial mode.

•Press G on the handset to enter programming mode.

•Press < or > until the screen displays DIAL TYPE: and the currently selected mode.

•Press s. The current setting blinks.

•Press > to select TONE or PULSE.

•Press s, to save the displayed mode.

4

Image 7

Contents MHz Cordless Telephone with Caller ID/Call Waiting Advanced American Telephones. All rights reserved Contents About Caller Identification Caller ID Before YOU BeginBefore You Install InstallationTable/Desk Installation Charge the handset battery Wall Installation Telephone Operation Page/Handset Locator Temporary Tone Dialing Handset Ringer Style/Battery SaveHeadset Jack Display Screen Messages Operating RangeStore Memory Numbers Telephone MemoryDial Edit Erase Edit Numbers Stored in MemoryDial Memory Numbers Delete Numbers Stored in MemoryAbout Call History Caller ID OperationReview Call History Delete All Calls Delete Records from Call HistoryDial a Displayed Number Delete a Specific CallOVERWRITE? no Store a Call History Record in MemoryPrivate Name Batteries Charging the Handset Battery PackReplacing the Handset Battery Pack Case of Difficulty If the phone does not ring when you receive a callIf the phone doesn’t work at all, check these items first If you hear other calls while using your phone If you hear noise or interference when using the phoneIf you lose a call after changing channels