AT&T HS8201 user manual Wall Installation, Position the wall mount adapter on the base

Page 8

INSTALLATION

Wall Installation

1 Position the wall mount adapter on the base.

Align tabs on wall mount adapter with holes on bottom of base. Snap wall mount adapter firmly into place.

2Connect the telephone line cord.

3Connect the power cord.

6

Image 8

Contents MHz Cordless Telephone HS-8201 Part 1 Important Product InformationAdvanced American Telephones. All rights reserved Contents Page Install the handset battery InstallationBefore You Install Attach the belt clip to the cordless handset optional Check for dial tone Table/Desk InstallationSet the dial mode Position the wall mount adapter on the base Wall InstallationConnect the telephone line cord Connect the power cord Follow Steps 3-5 in Table/Desk Installation Mount the base on the wallTelephone Operation Telephone Operation Handset Ringer Style Ringer Off/Battery SaveTemporary Tone Dialing Headset Jack Operating RangeTelephone Memory Charging the Handset Battery Pack BatteriesReplacing the Handset Battery Pack If the phone doesn’t work at all, check these items first If the phone does not ring when you receive a callCase of Difficulty If you lose a call after changing channels If you hear noise or interference when using the phoneIf you hear other calls while using your phone